Compare LED lightbox bars for an independent sign-cabinet build following TST Expo research. Separate the mounting rail from the light source when selecting parts; a rail demonstration is not a specification for a compatible LED bar.
Record the rail and LED bar separately
Measure the usable rail space, fixing locations, lens direction and cable clearance. Keep the rail length and each complete LED bar length as separate entries on the cabinet drawing. Test the assembled face before approving a production quantity.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I cut a rigid LED bar to match a mounting rail?
Do not transfer a rail’s cut-to-length feature to its LEDs. These selected bars have stated complete lengths. Choose a bar that fits the measured space; do not cut its circuit, lens or connector without explicit instructions for that exact product.
Does a rail that accepts one sign module accept every LED bar?
No universal fit is established. Check the fixing method, body dimensions, pinout and cable exits of the exact bar. A shared supply voltage does not prove mechanical, optical or connector compatibility.
What should I send for a lightbox component quotation?
Send the cabinet section, rail drawing, usable mounting lengths, sign-face sample and proposed bar links. List rails, LED bars, pack quantities, drivers and harnesses separately. Confirm which parts you already own before requesting a trial.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Compare LED lightbox bars for an independent sign-cabinet build following TST Expo research. Separate the mounting rail from the light source when selecting parts; a rail demonstration is not a specification for a compatible LED bar.
Record the rail and LED bar separately
Measure the usable rail space, fixing locations, lens direction and cable clearance. Keep the rail length and each complete LED bar length as separate entries on the cabinet drawing. Test the assembled face before approving a production quantity.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I cut a rigid LED bar to match a mounting rail?
Do not transfer a rail’s cut-to-length feature to its LEDs. These selected bars have stated complete lengths. Choose a bar that fits the measured space; do not cut its circuit, lens or connector without explicit instructions for that exact product.
Does a rail that accepts one sign module accept every LED bar?
No universal fit is established. Check the fixing method, body dimensions, pinout and cable exits of the exact bar. A shared supply voltage does not prove mechanical, optical or connector compatibility.
What should I send for a lightbox component quotation?
Send the cabinet section, rail drawing, usable mounting lengths, sign-face sample and proposed bar links. List rails, LED bars, pack quantities, drivers and harnesses separately. Confirm which parts you already own before requesting a trial.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.