12W/18W LED Module for MODULAP Fabric Lightboxes

A plug-in DC24V edge-lighting module for compatible MODULAP and SEG fabric lightbox frames. The 9° × 50° asymmetric lens directs light from the frame edge toward the center of the textile graphic.

Purchase essentials

Choose	12W or 18W / one fixed CCT / 10, 50 or 100 modules
12W output	1320 lm per module
Power supply	Compatible DC24V constant-voltage driver required separately
Price shown	Price is for the selected pack, not one module
Delivery	Worldwide shipping and duties are included

Key specifications

Power options	12W or 18W per module
Published output	1320 lm for 12W; confirm 18W project data before final specification
Color rendering	CRI ≥90 (Ra90)
Fixed CCT options	2700–3200K / 4200–4500K / 6500–7000K
Input	DC24V constant voltage
Optical lens	9° × 50° asymmetric edge-lighting lens
Dimensions	470 × 23 × 16mm overall height, including the lens
Connector	2-pin locking snap connector
Mounting	Screw mount or adhesive backing
Inter-module cable	Approximately 3–6.5cm
Dimming	Reduces to approximately 50%; below that threshold the module switches off. Not continuous 0–100% dimming.
Working temperature	-20°C to 55°C

Choose 12W or 18W

Option	Use as a starting point	Important
12W	Established option for compatible edge-lit SEG walls and reusable exhibition frames	Published output is 1320 lm per module
18W	For a tested layout that requires the higher-power option	Contact us for exact 18W project data; do not apply the 12W lumen figure

Brightness and uniformity depend on frame depth, textile graphic, reflective surfaces, module spacing, driver loading and whether modules are installed on opposing or multiple edges. Test a sample layout before production.

Check fit before ordering

Confirm the frame profile, available mounting width and 470mm module length.
The 16mm dimension is the overall module height including the lens, not the aluminum thickness.
Confirm that the locking connector, cable direction and 3–6.5cm inter-module cable suit the layout.
Choose one wattage and one CCT for the same lightbox to help reduce visible variation.
Send the frame drawing, internal depth, graphic size and planned module positions when requesting layout support.

Electrical and installation plan

Test the lightbox depth, fabric and module spacing with a sample layout.
Calculate total load from the selected wattage and module count.
Select a DC24V constant-voltage driver with appropriate capacity for the load, wiring, connectors and voltage drop.
Verify polarity and all connections before power-up; disconnect power before installation or service.
Do not exceed the tested driver, cable or connector limits.

Need a different connector or OEM configuration? Send us the frame drawing, module quantity, driver plan and connector requirement.

Typical applications

Exhibition builders: SEG walls, backlit counters and reusable modular display frames.
Retail and showrooms: textile graphics, branded walls and product-launch displays.
Rental and production companies: compatible replacement or repeat-project lighting layouts.
Museums and interiors: compatible textile information panels and feature walls after sample testing.

Buyer questions

Is a driver included?
No. Select a compatible DC24V constant-voltage driver for the total load.

How many modules are required?
There is no reliable count based only on edge length. Frame depth, fabric, spacing, reflective surfaces and target brightness must be considered.

Can the modules dim from 0 to 100%?
No. Brightness reduces to approximately 50%; below that point the module switches off.

What does the listed price include?
The selected 10-pack, 50-pack or 100-pack, with worldwide shipping and duties included.