Trade Show Light Mounting Systems, Clamps and Brackets
Shop trade show light mounting systems for exhibition booth lights, SEG lightboxes, aluminum profiles, truss structures and display panels. The range includes C-Clamps, truss clamps, light box mounting brackets, M8 sliding blocks, mounting clips and power connection accessories.
Choose by booth structure
- Round tube or truss: use a compatible C-Clamp, light clamp or truss mount clamp after checking tube diameter and load requirements.
- Square tube or crossbar: choose an adjustable square tube light clamp that matches the profile width and depth.
- Exhibition wall or panel: use a booth wall clamp, exhibition panel light clamp or display light bracket designed for the panel thickness.
- SEG lightbox extrusion: use an M8 aluminum sliding block, track slider or light box mounting bracket that fits the actual channel geometry.
- Banner stand or T-slot rail: select a matching slider or mount adapter based on the slot dimensions and thread size.
Professional mounting terms
Common procurement terms include Heavy Duty C-Clamp, Aluminum Truss Clamp, Trade Show Booth Wall Clamp, SEG Light Box Mounting Bracket, M8 Aluminum Sliding Block and Aluminum Extrusion Slider for LED Lights. Each product page concentrates on the term that matches its actual construction rather than repeating every term across all products.
Check compatibility before ordering
Mounting hardware is not universally compatible with every booth system. Measure the tube, wall, channel or extrusion; confirm the M8 thread and load requirement where applicable; and compare those dimensions with the product drawing. References to Octanorm, BeMatrix or other systems describe potential applications only and do not guarantee fit without dimensional verification.
Power cords and daisy-chain cables are also included in this collection for complete booth-light installation. Confirm connector type, voltage, plug standard and maximum electrical load separately from the mechanical clamp.
Free worldwide shipping: displayed prices include shipping and duties, so product prices are consistent worldwide.
Send us photos and dimensions of the mounting position if you need help selecting the correct clamp, bracket or slider.
Need the complete lighting and mounting setup?
Use our professional lighting solutions guide to match booth lights, SEG lightbox modules and mounting hardware by application.
-
Dual M8 Light Box Mounting Brackets – 10/20/50 Packs -
Square Tube Light Clamps – Up to 31mm, 5/10/20 Packs -
Pop-Up Display LED Arm Light Mounting Clip – Reverse, Black -
Pop-Up Display LED Arm Light Mounting Clip – Standard, Black -
Banner Stand Light Mount Adapter – T-Slot Connector for Exhibition Lights -
Curved Hook Aluminum Mounting Clip for Exhibition Booth and Display Lights -
Aluminum T-Slot Mounting Clip – Sliding Rail Adapter for Exhibition Lights -
1m IEC C14 to C13 Jumper Cables – 5/10/20 Packs -
3m IEC C13 Power Cord for Trade Show Display Lights -
M8 Sliding Block for SEG Lightbox & Booth Light Mounting -
Aluminum C-Clamps for Booth Lights – Up to 55mm, 5-Pack+
Trade Show Light Mounting Systems, Clamps and Brackets
Shop trade show light mounting systems for exhibition booth lights, SEG lightboxes, aluminum profiles, truss structures and display panels. The range includes C-Clamps, truss clamps, light box mounting brackets, M8 sliding blocks, mounting clips and power connection accessories.
Choose by booth structure
- Round tube or truss: use a compatible C-Clamp, light clamp or truss mount clamp after checking tube diameter and load requirements.
- Square tube or crossbar: choose an adjustable square tube light clamp that matches the profile width and depth.
- Exhibition wall or panel: use a booth wall clamp, exhibition panel light clamp or display light bracket designed for the panel thickness.
- SEG lightbox extrusion: use an M8 aluminum sliding block, track slider or light box mounting bracket that fits the actual channel geometry.
- Banner stand or T-slot rail: select a matching slider or mount adapter based on the slot dimensions and thread size.
Professional mounting terms
Common procurement terms include Heavy Duty C-Clamp, Aluminum Truss Clamp, Trade Show Booth Wall Clamp, SEG Light Box Mounting Bracket, M8 Aluminum Sliding Block and Aluminum Extrusion Slider for LED Lights. Each product page concentrates on the term that matches its actual construction rather than repeating every term across all products.
Check compatibility before ordering
Mounting hardware is not universally compatible with every booth system. Measure the tube, wall, channel or extrusion; confirm the M8 thread and load requirement where applicable; and compare those dimensions with the product drawing. References to Octanorm, BeMatrix or other systems describe potential applications only and do not guarantee fit without dimensional verification.
Power cords and daisy-chain cables are also included in this collection for complete booth-light installation. Confirm connector type, voltage, plug standard and maximum electrical load separately from the mechanical clamp.
Free worldwide shipping: displayed prices include shipping and duties, so product prices are consistent worldwide.
Send us photos and dimensions of the mounting position if you need help selecting the correct clamp, bracket or slider.
Need the complete lighting and mounting setup?
Use our professional lighting solutions guide to match booth lights, SEG lightbox modules and mounting hardware by application.