Searching for SupplySide Global lightbox LED modules or SupplySide West LED bars for ingredient-brand graphics? Compare internal sources for printed botanical towers, product-line panels and illuminated counter faces used in ingredient exhibition displays.
Approve each ingredient graphic before repeating the LED layout
Make a sample with the final backlit print, including the smallest ingredient names, plant-image shadows and pale background areas. Review every face from its aisle approach and at discussion distance. Keep a record for each tower and counter compartment; different widths or print densities may need different trial layouts.
Compare LED bars for the lightbox compartment
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED modules should I compare for towers and counters?
The linkable DC24V family offers 212mm, 319mm and 480mm lengths. Compare the 470mm 20W bar for a different output and lens, or the 200mm 7W bar for short frame sections. Confirm usable space, graphic transmission and the full driver load before ordering.
How can I keep ingredient names readable on botanical graphics?
Check the actual print with LEDs on and off. Look at small letters against dark leaves, pale image detail, the center and corners, then inspect each aisle-facing side. Approve a tested balance of print and lighting rather than selecting the highest wattage from the catalog.
Can I standardize lighting across several ingredient brands?
Record the LED model, fixed color-temperature option, quantity, spacing and driver for each approved face. Retest when the frame size or artwork changes. Check connector pinout and polarity before combining parts, and send a face-by-face schedule when requesting a repeat-project quote.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Searching for SupplySide Global lightbox LED modules or SupplySide West LED bars for ingredient-brand graphics? Compare internal sources for printed botanical towers, product-line panels and illuminated counter faces used in ingredient exhibition displays.
Approve each ingredient graphic before repeating the LED layout
Make a sample with the final backlit print, including the smallest ingredient names, plant-image shadows and pale background areas. Review every face from its aisle approach and at discussion distance. Keep a record for each tower and counter compartment; different widths or print densities may need different trial layouts.
Compare LED bars for the lightbox compartment
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED modules should I compare for towers and counters?
The linkable DC24V family offers 212mm, 319mm and 480mm lengths. Compare the 470mm 20W bar for a different output and lens, or the 200mm 7W bar for short frame sections. Confirm usable space, graphic transmission and the full driver load before ordering.
How can I keep ingredient names readable on botanical graphics?
Check the actual print with LEDs on and off. Look at small letters against dark leaves, pale image detail, the center and corners, then inspect each aisle-facing side. Approve a tested balance of print and lighting rather than selecting the highest wattage from the catalog.
Can I standardize lighting across several ingredient brands?
Record the LED model, fixed color-temperature option, quantity, spacing and driver for each approved face. Retest when the frame size or artwork changes. Check connector pinout and polarity before combining parts, and send a face-by-face schedule when requesting a repeat-project quote.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.