SIGN Istanbul covers LED systems and industrial sign and display production. For illuminated display fabrication, select internal LED bars by checking their mounting points in the actual frame. Browse all LED Modules below.
Check the fixing location before fabricating the frame
Mark the intended mounting points on the real frame section. Check screw access, bracket space, cable clearance and distance from the printed face. Keep fasteners out of the graphic path. A bar dimension alone does not confirm the frame can hold or service it.
Confirm model-specific hardware and access
List the fixing parts supplied with the exact model and those you must source separately. Check how tools reach each fixing after assembly. Do not assume all LED bars include the same hardware, or alter a structural frame member simply to make a mounting hole fit.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can one mounting-hole pattern be used for every LED bar?
Do not assume it. Check the chosen model and mounting parts against the frame section. Approve a physical assembly before repeating the fixing pattern in production.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the frame section, fixing-point sketch, screw access, graphic clearance, LED model and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens
SIGN Istanbul covers LED systems and industrial sign and display production. For illuminated display fabrication, select internal LED bars by checking their mounting points in the actual frame. Browse all LED Modules below.
Check the fixing location before fabricating the frame
Mark the intended mounting points on the real frame section. Check screw access, bracket space, cable clearance and distance from the printed face. Keep fasteners out of the graphic path. A bar dimension alone does not confirm the frame can hold or service it.
Confirm model-specific hardware and access
List the fixing parts supplied with the exact model and those you must source separately. Check how tools reach each fixing after assembly. Do not assume all LED bars include the same hardware, or alter a structural frame member simply to make a mounting hole fit.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can one mounting-hole pattern be used for every LED bar?
Do not assume it. Check the chosen model and mounting parts against the frame section. Approve a physical assembly before repeating the fixing pattern in production.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the frame section, fixing-point sketch, screw access, graphic clearance, LED model and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.