For Sign & Digital UK exhibitors in Birmingham, a reusable illuminated display needs a practical plan for packing, rebuilding and replacing components. This collection is for sign shops and exhibition contractors sourcing internal lightbox LED bars for repeat installations. Check the organizer’s current event information before arranging travel or deliveries.
Design the lightbox for the next rebuild
Label each bar position and retain a wiring diagram with the packed frame. Check that short linking leads reach without strain and that connectors remain accessible after the graphic is fitted. Keep replacement bars matched to the original wattage, CCT and connector; a visually similar LED module may have different polarity or optics. Photograph the working layout before dismantling it.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
Can these LED modules connect straight to a UK mains socket?
No. These lightbox bars use DC24V and need a suitable constant-voltage driver. Confirm the driver’s mains input and UK plug arrangement, output capacity and the venue’s electrical requirements. Do not substitute an arm-light linking cable for a lightbox-module connection.
Before ordering
LED Modules are internal light sources, not complete lightboxes. Confirm frame depth, graphic material, bar spacing, connector polarity and DC24V driver capacity; test a sample for hotspots and dark areas. For arm lights, verify the exact input, plug, clamp and venue requirements. Follow the selected model’s connection limits.
Send the frame drawing, graphic size, product links, quantities, delivery destination and required arrival date through our contact page. Check the shipping policy and arrange time to test the display before dispatch to the event.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
For Sign & Digital UK exhibitors in Birmingham, a reusable illuminated display needs a practical plan for packing, rebuilding and replacing components. This collection is for sign shops and exhibition contractors sourcing internal lightbox LED bars for repeat installations. Check the organizer’s current event information before arranging travel or deliveries.
Design the lightbox for the next rebuild
Label each bar position and retain a wiring diagram with the packed frame. Check that short linking leads reach without strain and that connectors remain accessible after the graphic is fitted. Keep replacement bars matched to the original wattage, CCT and connector; a visually similar LED module may have different polarity or optics. Photograph the working layout before dismantling it.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
Can these LED modules connect straight to a UK mains socket?
No. These lightbox bars use DC24V and need a suitable constant-voltage driver. Confirm the driver’s mains input and UK plug arrangement, output capacity and the venue’s electrical requirements. Do not substitute an arm-light linking cable for a lightbox-module connection.
Before ordering
LED Modules are internal light sources, not complete lightboxes. Confirm frame depth, graphic material, bar spacing, connector polarity and DC24V driver capacity; test a sample for hotspots and dark areas. For arm lights, verify the exact input, plug, clamp and venue requirements. Follow the selected model’s connection limits.
Send the frame drawing, graphic size, product links, quantities, delivery destination and required arrival date through our contact page. Check the shipping policy and arrange time to test the display before dispatch to the event.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.