Planning a printed landscape lightbox for the Safari Club International Convention? Outfitters and outdoor brands can compare internal LED modules for indoor graphics showing destinations, scenery and contact details. Start with the actual print and frame, whether you own the display or your builder has approved the component layout.
Keep dark scenery and small contact details readable
A bright sky and dark woodland on the same print need a sample test at the intended viewing distance. Compare lens distribution, bar position and image transmission before increasing wattage. These components illuminate a printed graphic; they are separate from LED video walls, illuminated display cases and task lights on equipment.
Compare LED bars for the approved printed fabric
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
How do I avoid losing detail in a dark landscape graphic?
Test the real backlit print in the final frame. Check dark regions, pale sky and small text together. Uneven brightness may need a different bar position or print treatment; extra watts alone cannot correct every image or shallow frame.
Can one lightbox be reused for different destination graphics?
Compare replacement prints using the same tested lighting layout. A change in fabric transmission can change the result even when the frame stays the same. Keep a record of bar family, quantity, connector polarity and driver load so the next assembly can be checked.
Are these modules suitable for outdoor camps or optical tests?
This selection is for indoor printed lightboxes. The featured 20W bar is IP20; do not treat it as an outdoor luminaire or optical test source. Send the frame's internal size, depth, mounting drawing, connector photos and DC24V driver label for component selection.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Planning a printed landscape lightbox for the Safari Club International Convention? Outfitters and outdoor brands can compare internal LED modules for indoor graphics showing destinations, scenery and contact details. Start with the actual print and frame, whether you own the display or your builder has approved the component layout.
Keep dark scenery and small contact details readable
A bright sky and dark woodland on the same print need a sample test at the intended viewing distance. Compare lens distribution, bar position and image transmission before increasing wattage. These components illuminate a printed graphic; they are separate from LED video walls, illuminated display cases and task lights on equipment.
Compare LED bars for the approved printed fabric
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
How do I avoid losing detail in a dark landscape graphic?
Test the real backlit print in the final frame. Check dark regions, pale sky and small text together. Uneven brightness may need a different bar position or print treatment; extra watts alone cannot correct every image or shallow frame.
Can one lightbox be reused for different destination graphics?
Compare replacement prints using the same tested lighting layout. A change in fabric transmission can change the result even when the frame stays the same. Keep a record of bar family, quantity, connector polarity and driver load so the next assembly can be checked.
Are these modules suitable for outdoor camps or optical tests?
This selection is for indoor printed lightboxes. The featured 20W bar is IP20; do not treat it as an outdoor luminaire or optical test source. Send the frame's internal size, depth, mounting drawing, connector photos and DC24V driver label for component selection.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.