Planning a printed lightbox sample around NIZE’s Test before you invest demos? Compare internal LED modules with your own artwork and material. NIZE also describes Day & Night methods in its academy programme; confirm the scope of your demo directly with NIZE.
Compare the print with the light on and off
Keep the artwork, ink layers, substrate, frame depth and LED positions fixed while comparing light sources. View the finished face with backlighting on and off under the intended ambient light. Record the model, CCT and layout with the approved sample; a printer demo alone does not approve the complete lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can LED bars alone create a Day & Night graphic?
No. The printed layers and material control how the graphic appears in each condition. LED modules provide the internal light source. Agree the printing method with your print provider and test the assembled face; changing wattage alone cannot produce two different images.
Should I choose a 200mm or 470mm LED bar for my trial?
Measure the usable internal mounting run, including connector and cable clearance. Compare the 200mm 7W compact bar with the 470mm 12W/18W MODULAP or 20W rigid formats. Test the selected optics at the actual frame depth; length alone does not establish uniformity.
What information helps size the DC24V driver?
Specify the exact bar model, quantity, total rated watts, wiring layout and required driver headroom. These featured bars need a separate compatible constant-voltage supply. Send the approved sample layout and destination for a model-specific quotation; printer or RIP compatibility is not implied.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Planning a printed lightbox sample around NIZE’s Test before you invest demos? Compare internal LED modules with your own artwork and material. NIZE also describes Day & Night methods in its academy programme; confirm the scope of your demo directly with NIZE.
Compare the print with the light on and off
Keep the artwork, ink layers, substrate, frame depth and LED positions fixed while comparing light sources. View the finished face with backlighting on and off under the intended ambient light. Record the model, CCT and layout with the approved sample; a printer demo alone does not approve the complete lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can LED bars alone create a Day & Night graphic?
No. The printed layers and material control how the graphic appears in each condition. LED modules provide the internal light source. Agree the printing method with your print provider and test the assembled face; changing wattage alone cannot produce two different images.
Should I choose a 200mm or 470mm LED bar for my trial?
Measure the usable internal mounting run, including connector and cable clearance. Compare the 200mm 7W compact bar with the 470mm 12W/18W MODULAP or 20W rigid formats. Test the selected optics at the actual frame depth; length alone does not establish uniformity.
What information helps size the DC24V driver?
Specify the exact bar model, quantity, total rated watts, wiring layout and required driver headroom. These featured bars need a separate compatible constant-voltage supply. Send the approved sample layout and destination for a model-specific quotation; printer or RIP compatibility is not implied.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.