LED CHINA includes advertising-lighting suppliers offering lightbox modules and rigid bars. Select internal components by checking the space their wiring needs inside your frame. Browse all LED Modules below; these products do not generate video images.
Measure the connector as well as the LED bar
Use the actual frame section to check the plug body, mating space, cable exit and strain-relief location. A bar fitting inside the frame does not mean its connector can be inserted or removed. Keep wiring clear of the printed face, mounting screws and moving panels.
Confirm an accessible service route
Disconnect power before inspecting access. Test how the chosen connector can be reached without pulling on its wires or removing structural supports. For the profile family, confirm the wire-exit option before ordering. Connector appearance alone does not prove matching pin assignment or polarity.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Does a matching frame length confirm wiring clearance?
No. Check the connector body and cable route in the assembled frame. A connection that fits during bench assembly may become inaccessible after the graphic and panels are installed.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the frame section, connector dimensions, cable route, access opening, LED model and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens
LED CHINA includes advertising-lighting suppliers offering lightbox modules and rigid bars. Select internal components by checking the space their wiring needs inside your frame. Browse all LED Modules below; these products do not generate video images.
Measure the connector as well as the LED bar
Use the actual frame section to check the plug body, mating space, cable exit and strain-relief location. A bar fitting inside the frame does not mean its connector can be inserted or removed. Keep wiring clear of the printed face, mounting screws and moving panels.
Confirm an accessible service route
Disconnect power before inspecting access. Test how the chosen connector can be reached without pulling on its wires or removing structural supports. For the profile family, confirm the wire-exit option before ordering. Connector appearance alone does not prove matching pin assignment or polarity.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Does a matching frame length confirm wiring clearance?
No. Check the connector body and cable route in the assembled frame. A connection that fits during bench assembly may become inaccessible after the graphic and panels are installed.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the frame section, connector dimensions, cable route, access opening, LED model and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.