Guangzhou International Lighting Exhibition (GILE) includes optical light sources and electrical components. For indoor lightbox manufacture, compare a proposed replacement against the approved reference. Browse all LED Modules below.
Compare the complete specification, not just wattage
Record the reference model, dimensions including lenses, mounting positions, beam pattern, voltage, connector, stated wattage and colour temperature. Compare the proposed bar field by field. Similar output or size does not prove mechanical or electrical interchangeability.
Validate the replacement in the finished frame
After a qualified compatibility and wiring review, test the candidate with the intended graphic and frame. Compare the illuminated face under the same conditions as the approved sample. Different optics or mounting can change the result even when headline specifications seem similar.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a bar with similar wattage be used as a direct replacement?
Not on wattage alone. Mounting, dimensions, voltage, wiring, controls and optical behaviour must match the project requirements, followed by a finished-frame trial.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send reference and candidate specifications, frame section, graphic material, connector photos, control details and required quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
Guangzhou International Lighting Exhibition (GILE) includes optical light sources and electrical components. For indoor lightbox manufacture, compare a proposed replacement against the approved reference. Browse all LED Modules below.
Compare the complete specification, not just wattage
Record the reference model, dimensions including lenses, mounting positions, beam pattern, voltage, connector, stated wattage and colour temperature. Compare the proposed bar field by field. Similar output or size does not prove mechanical or electrical interchangeability.
Validate the replacement in the finished frame
After a qualified compatibility and wiring review, test the candidate with the intended graphic and frame. Compare the illuminated face under the same conditions as the approved sample. Different optics or mounting can change the result even when headline specifications seem similar.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a bar with similar wattage be used as a direct replacement?
Not on wattage alone. Mounting, dimensions, voltage, wiring, controls and optical behaviour must match the project requirements, followed by a finished-frame trial.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send reference and candidate specifications, frame section, graphic material, connector photos, control details and required quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.