FESPA Africa serves sign and display production alongside specialist printing. Select internal LED components for an indoor lightbox that will be dismantled and reassembled. Browse all LED Modules below.
Inspect the assembly before reconnecting power
With power disconnected, compare bar positions, mounting parts and connector seating with the approved assembly record. Check the cable route and graphic alignment after transport. Do not energize damaged components or use wires to support a bar.
Review the rebuilt lightbox against its approved sample
After qualified wiring and frame checks, compare the illuminated face under the agreed conditions. A changed bright or dark area may involve the graphic, mounting or layout; do not assume a higher-output bar is the solution. Component choice does not certify transport or frame safety.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can the original LED layout be accepted without checking reassembly?
Check it against the assembly record. Dismantling and transport can change mounting, cable position or graphic alignment even when the model is unchanged.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the assembly record, frame section, post-transport photos, cable route, LED model and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens
FESPA Africa serves sign and display production alongside specialist printing. Select internal LED components for an indoor lightbox that will be dismantled and reassembled. Browse all LED Modules below.
Inspect the assembly before reconnecting power
With power disconnected, compare bar positions, mounting parts and connector seating with the approved assembly record. Check the cable route and graphic alignment after transport. Do not energize damaged components or use wires to support a bar.
Review the rebuilt lightbox against its approved sample
After qualified wiring and frame checks, compare the illuminated face under the agreed conditions. A changed bright or dark area may involve the graphic, mounting or layout; do not assume a higher-output bar is the solution. Component choice does not certify transport or frame safety.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can the original LED layout be accepted without checking reassembly?
Check it against the assembly record. Dismantling and transport can change mounting, cable position or graphic alignment even when the model is unchanged.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the assembly record, frame section, post-transport photos, cable route, LED model and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.