ATP Color Open House has featured printed lightbox textiles, as documented by participating supplier TTS. For print shops and lightbox fabricators evaluating these applications, this collection helps select internal LED bars for a finished-fabric trial rather than judge the print only on a roll.
Test the finished textile in the intended frame
Use the production printing and finishing process, then cut and tension the graphic in the actual frame. Record usable depth, bar spacing and CCT. Compare samples with the same light source before changing LED models, so printing or fabric differences are not confused with lighting changes. Obtain approval on the assembled illuminated face.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Why does fabric look different after it is stretched in a lightbox?
Material, printing, finishing and tension can affect the viewed result. Compare the finished sample with the approved reference under the same light and frame geometry. Investigate folds, seams, ink coverage and bar positions before simply increasing wattage.
Which LED bars should I compare for a fabric trial?
The 470mm MODULAP 12W/18W and 20W rigid bars offer different formats to assess; 212mm/319mm/480mm linkable bars support other internal runs, and the 200mm 7W bar suits a short test section after fit checks. A textile demonstration does not certify any LED bar or frame combination.
Does one pack include the driver and a complete lightbox?
No. The featured MODULAP 12W/18W, rigid 20W and compact 7W models have 10-, 50- or 100-bar pack options. Verify the selected pack and required bar count; choose the external DC24V driver separately. Send fabric details, frame drawing and quantities for a trial quotation.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
ATP Color Open House has featured printed lightbox textiles, as documented by participating supplier TTS. For print shops and lightbox fabricators evaluating these applications, this collection helps select internal LED bars for a finished-fabric trial rather than judge the print only on a roll.
Test the finished textile in the intended frame
Use the production printing and finishing process, then cut and tension the graphic in the actual frame. Record usable depth, bar spacing and CCT. Compare samples with the same light source before changing LED models, so printing or fabric differences are not confused with lighting changes. Obtain approval on the assembled illuminated face.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Why does fabric look different after it is stretched in a lightbox?
Material, printing, finishing and tension can affect the viewed result. Compare the finished sample with the approved reference under the same light and frame geometry. Investigate folds, seams, ink coverage and bar positions before simply increasing wattage.
Which LED bars should I compare for a fabric trial?
The 470mm MODULAP 12W/18W and 20W rigid bars offer different formats to assess; 212mm/319mm/480mm linkable bars support other internal runs, and the 200mm 7W bar suits a short test section after fit checks. A textile demonstration does not certify any LED bar or frame combination.
Does one pack include the driver and a complete lightbox?
No. The featured MODULAP 12W/18W, rigid 20W and compact 7W models have 10-, 50- or 100-bar pack options. Verify the selected pack and required bar count; choose the external DC24V driver separately. Send fabric details, frame drawing and quantities for a trial quotation.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.