Searching for ASRM Scientific Congress & Expo lightbox LED modules or LED bars for an illuminated reception counter? Compare internal sources for printed brand backwalls and counter fronts on reproductive-medicine industry exhibits.
Should the backwall and reception front use the same LED layout?
Size each printed enclosure independently. The backwall may have long mounting spans while the reception front has shorter sections and different graphic-to-source clearance. Compare edge-lighting optics with the actual depth and reflective surfaces; do not copy the wall spacing into the desk or assume a short bar is a drop-in kit replacement.
How can the reception lightbox support the backwall message?
Approve both prints together at their intended viewing distances. Check the white tone and brand colors, and adjust the reception brightness so the counter does not dominate the main message. Inspect small supporting text from a conversation position and the larger wall identity from the aisle. Retest after moving product displays in front of either face.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can the wall and counter run from one power supply?
Verify each model’s voltage, connector pinout and run limits before planning a shared driver. Calculate loads for both enclosures, include suitable headroom and check cable voltage drop. Provide accessible disconnection for the counter and wall; a common voltage does not prove their connectors or controls are compatible.
Before ordering
Check usable depths, bar mounting, service access and the compatible external driver. These components illuminate printed exhibit graphics; laboratory, treatment and medical-device use require their own specifications and are not established by this application.
Compare all 26 LED Modules below. Send separate wall and counter drawings, print samples and desired brightness balance for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Searching for ASRM Scientific Congress & Expo lightbox LED modules or LED bars for an illuminated reception counter? Compare internal sources for printed brand backwalls and counter fronts on reproductive-medicine industry exhibits.
Should the backwall and reception front use the same LED layout?
Size each printed enclosure independently. The backwall may have long mounting spans while the reception front has shorter sections and different graphic-to-source clearance. Compare edge-lighting optics with the actual depth and reflective surfaces; do not copy the wall spacing into the desk or assume a short bar is a drop-in kit replacement.
How can the reception lightbox support the backwall message?
Approve both prints together at their intended viewing distances. Check the white tone and brand colors, and adjust the reception brightness so the counter does not dominate the main message. Inspect small supporting text from a conversation position and the larger wall identity from the aisle. Retest after moving product displays in front of either face.
Compare LED lightbox sources
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can the wall and counter run from one power supply?
Verify each model’s voltage, connector pinout and run limits before planning a shared driver. Calculate loads for both enclosures, include suitable headroom and check cable voltage drop. Provide accessible disconnection for the counter and wall; a common voltage does not prove their connectors or controls are compatible.
Before ordering
Check usable depths, bar mounting, service access and the compatible external driver. These components illuminate printed exhibit graphics; laboratory, treatment and medical-device use require their own specifications and are not established by this application.
Compare all 26 LED Modules below. Send separate wall and counter drawings, print samples and desired brightness balance for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.