Sourcing backlit textile or SEG fabric through ALLPRINT Indonesia? Select internal LED modules using a finished printed sample, including its sewn edges and joins. Compare the complete LED Modules range for indoor fabric lightboxes before committing to a production order.
Test the finished graphic, including seams and creases
The organizer's exhibitor directory identifies backlit textile and SEG fabric. For your own or builder-approved frame, place the actual join, hem or fold within the illuminated test face. Keep the print and frame fixed while comparing LED positions; a smooth unprinted swatch does not show how the completed graphic will look.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED modules suit a joined SEG graphic?
Measure the internal span and depth, then test an appropriate side-lit or rear-lit layout. Inspect the join from the intended viewing distance. Fabric type alone cannot determine bar spacing or guarantee that a seam disappears.
Can extra LED power hide a crease?
Check fabric tension and finishing first. Compare the same finished graphic at the proposed fixed CCT and layout. A shadow caused by a fold may remain even with a brighter source; approve the physical sample before ordering more bars.
What should I send for a lightbox LED quotation?
Send the frame section, finished graphic size, join positions, illuminated sample photos and proposed bar links. Specify DC24V, connector pinout, total load and driver access. Use each product's connection limits, then confirm pack quantities for the trial and production builds.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Sourcing backlit textile or SEG fabric through ALLPRINT Indonesia? Select internal LED modules using a finished printed sample, including its sewn edges and joins. Compare the complete LED Modules range for indoor fabric lightboxes before committing to a production order.
Test the finished graphic, including seams and creases
The organizer's exhibitor directory identifies backlit textile and SEG fabric. For your own or builder-approved frame, place the actual join, hem or fold within the illuminated test face. Keep the print and frame fixed while comparing LED positions; a smooth unprinted swatch does not show how the completed graphic will look.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED modules suit a joined SEG graphic?
Measure the internal span and depth, then test an appropriate side-lit or rear-lit layout. Inspect the join from the intended viewing distance. Fabric type alone cannot determine bar spacing or guarantee that a seam disappears.
Can extra LED power hide a crease?
Check fabric tension and finishing first. Compare the same finished graphic at the proposed fixed CCT and layout. A shadow caused by a fold may remain even with a brighter source; approve the physical sample before ordering more bars.
What should I send for a lightbox LED quotation?
Send the frame section, finished graphic size, join positions, illuminated sample photos and proposed bar links. Specify DC24V, connector pinout, total load and driver access. Use each product's connection limits, then confirm pack quantities for the trial and production builds.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.