wetec brings together signmaking and illuminated-advertising suppliers. Define the lightbox LED bar and its mating cable as an identified assembly before a repeat order. Browse the full LED Modules range below.
Specify the connector and mating cable together
Record the bar model, socket photos, pin assignment and cable length. A connector-family name does not confirm identical wiring. DC sockets, Molex-family plugs and separate plug-in connectors require their own mating check; do not infer polarity from cable color.
Approve a harness sample before cable production
Check fit and service access in the assembled frame. Record feed points and the tested cable arrangement. The featured 10W DC-plug bar includes one connection cable per bar; the 12W bar includes a separate 3-pin connector. Custom terminals require a confirmed quotation, not an assumed standard variant.
Compare LED lightbox sources
- 13W edge-lit bar: 360mm, DC24V, 1430lm, 15°×60° lens and Molex 5557 / Mini-Fit Jr. family connection.
- 10W DC-plug edge-lit bar: 360mm, DC24V, 1000lm ±10%, 15°×45° lens and dual-end DC sockets.
- 12W dual-angle edge-lit bar: 517mm, DC24V, 1200lm, 15°×45° lens and separate 3-pin plug-in connection.
Does changing the connector change the voltage requirement?
No. These selected bars require DC24V. Verify pinout, polarity and cable capacity after any connector change, then confirm the complete electrical arrangement before powering it.
Before ordering
These are internal LED sources, not complete lightboxes or a universal wiring kit. Check DC24V, load and voltage drop and confirm external power separately. The featured 13W and 10W DC-plug models each allow at most 6 per run after wiring checks; do not apply this limit to the 12W model. Disconnect power before changing connections.
Send connector photos from both sides, bar model, pin assignment, cable lengths, feed drawing and quantity through our contact page for a mating-component review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+
wetec brings together signmaking and illuminated-advertising suppliers. Define the lightbox LED bar and its mating cable as an identified assembly before a repeat order. Browse the full LED Modules range below.
Specify the connector and mating cable together
Record the bar model, socket photos, pin assignment and cable length. A connector-family name does not confirm identical wiring. DC sockets, Molex-family plugs and separate plug-in connectors require their own mating check; do not infer polarity from cable color.
Approve a harness sample before cable production
Check fit and service access in the assembled frame. Record feed points and the tested cable arrangement. The featured 10W DC-plug bar includes one connection cable per bar; the 12W bar includes a separate 3-pin connector. Custom terminals require a confirmed quotation, not an assumed standard variant.
Compare LED lightbox sources
- 13W edge-lit bar: 360mm, DC24V, 1430lm, 15°×60° lens and Molex 5557 / Mini-Fit Jr. family connection.
- 10W DC-plug edge-lit bar: 360mm, DC24V, 1000lm ±10%, 15°×45° lens and dual-end DC sockets.
- 12W dual-angle edge-lit bar: 517mm, DC24V, 1200lm, 15°×45° lens and separate 3-pin plug-in connection.
Does changing the connector change the voltage requirement?
No. These selected bars require DC24V. Verify pinout, polarity and cable capacity after any connector change, then confirm the complete electrical arrangement before powering it.
Before ordering
These are internal LED sources, not complete lightboxes or a universal wiring kit. Check DC24V, load and voltage drop and confirm external power separately. The featured 13W and 10W DC-plug models each allow at most 6 per run after wiring checks; do not apply this limit to the 12W model. Disconnect power before changing connections.
Send connector photos from both sides, bar model, pin assignment, cable lengths, feed drawing and quantity through our contact page for a mating-component review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.