Choosing LED bars for a fabric lightbox tower at the Transcatheter Cardiovascular Therapeutics Conference, commonly called TCT? Compare internal lightbox sources for printed booth graphics and specify the illuminated faces around meeting areas and canopies.
Which LEDs suit a TCT fabric lightbox tower?
Start with the illuminated face dimensions, clear frame depth and source mounting positions. Check the final fabric with pale backgrounds, fine lettering and diagram details at the intended white tone. Compare edge-lit and rear-backlit arrangements using the actual frame section; tower height or bar wattage alone cannot establish quantity or even illumination.
Will canopies and meeting-room walls affect the lightbox?
Mark canopy edges, structural supports and adjacent hard walls on the drawing. They can change viewing angles or obstruct an illuminated face. Check the assembled tower from the aisle and meeting entrance, and test each differently shaped face with its actual print. Leave access to wiring after the adjoining structures are installed.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can fabric lightboxes and halo-lit logos use the same LED layout?
They need separate layouts. A printed fabric face transmits light across a broad surface; a raised halo-lit logo projects light onto the surrounding surface. Compare mounting space, optical direction and electrical load for each application. These product recommendations concern internal graphic-lightbox sources; they do not specify a halo-letter system.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send labelled tower sections, fabric samples, canopy positions and wiring-access drawings for an LED component quote. State the desired white tone and power arrangement. The LED bars do not include fabric, tower frames or meeting-room structures.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Choosing LED bars for a fabric lightbox tower at the Transcatheter Cardiovascular Therapeutics Conference, commonly called TCT? Compare internal lightbox sources for printed booth graphics and specify the illuminated faces around meeting areas and canopies.
Which LEDs suit a TCT fabric lightbox tower?
Start with the illuminated face dimensions, clear frame depth and source mounting positions. Check the final fabric with pale backgrounds, fine lettering and diagram details at the intended white tone. Compare edge-lit and rear-backlit arrangements using the actual frame section; tower height or bar wattage alone cannot establish quantity or even illumination.
Will canopies and meeting-room walls affect the lightbox?
Mark canopy edges, structural supports and adjacent hard walls on the drawing. They can change viewing angles or obstruct an illuminated face. Check the assembled tower from the aisle and meeting entrance, and test each differently shaped face with its actual print. Leave access to wiring after the adjoining structures are installed.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can fabric lightboxes and halo-lit logos use the same LED layout?
They need separate layouts. A printed fabric face transmits light across a broad surface; a raised halo-lit logo projects light onto the surrounding surface. Compare mounting space, optical direction and electrical load for each application. These product recommendations concern internal graphic-lightbox sources; they do not specify a halo-letter system.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send labelled tower sections, fabric samples, canopy positions and wiring-access drawings for an LED component quote. State the desired white tone and power arrangement. The LED bars do not include fabric, tower frames or meeting-room structures.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.