Sign, Print & Promotion Norway serves sign makers, manufacturers and installers. Define the required white-light behavior before ordering a lightbox control system. Browse the full LED Modules range below.
Separate white-light choice from brightness control
Ordering a fixed white-light range does not make the bar tunable white. List the selected model and CCT separately from the required dimming behavior. Confirm the driver and control interface before promising an adjustment range to your client.
Test the lowest usable brightness before approval
For the highlighted 12W dual-angle bar, brightness reduces to approximately 50%, then the module switches off. It does not dim smoothly to zero. Check the actual bar, driver and control together, and record the minimum stable setting for the finished sign.
Compare LED lightbox sources
- 12W dual-angle edge-lit bar: 517mm, DC24V, 1200lm, 15°×45° lens and 3-pin connection; verify the stated dimming limit.
- 18W edge-lit bar: 585mm, DC24V, 1800lm and 14°×50° lens; fixed white-light options.
- 13W edge-lit bar: 360mm, DC24V, 1430lm, 15°×60° lens and Molex 5557 / Mini-Fit Jr. family connection.
Does a 3-pin connector mean a selectable white-light channel?
No. Pin count alone does not define the control function. The listed 12W bar has fixed white-light options; verify its pinout and the intended control interface instead of inferring tunable white from the connector.
Before ordering
These are internal sources, not complete signs. Verify DC24V power, polarity, wiring and load. The 13W bar allows at most 6 per run after electrical checks; that limit does not cover other models. Confirm drivers and controls separately and request any required model-specific compliance documents.
Send the frame dimensions, bar model, selected white-light range, driver details and required brightness behavior through our contact page for a control-specification review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+
Sign, Print & Promotion Norway serves sign makers, manufacturers and installers. Define the required white-light behavior before ordering a lightbox control system. Browse the full LED Modules range below.
Separate white-light choice from brightness control
Ordering a fixed white-light range does not make the bar tunable white. List the selected model and CCT separately from the required dimming behavior. Confirm the driver and control interface before promising an adjustment range to your client.
Test the lowest usable brightness before approval
For the highlighted 12W dual-angle bar, brightness reduces to approximately 50%, then the module switches off. It does not dim smoothly to zero. Check the actual bar, driver and control together, and record the minimum stable setting for the finished sign.
Compare LED lightbox sources
- 12W dual-angle edge-lit bar: 517mm, DC24V, 1200lm, 15°×45° lens and 3-pin connection; verify the stated dimming limit.
- 18W edge-lit bar: 585mm, DC24V, 1800lm and 14°×50° lens; fixed white-light options.
- 13W edge-lit bar: 360mm, DC24V, 1430lm, 15°×60° lens and Molex 5557 / Mini-Fit Jr. family connection.
Does a 3-pin connector mean a selectable white-light channel?
No. Pin count alone does not define the control function. The listed 12W bar has fixed white-light options; verify its pinout and the intended control interface instead of inferring tunable white from the connector.
Before ordering
These are internal sources, not complete signs. Verify DC24V power, polarity, wiring and load. The 13W bar allows at most 6 per run after electrical checks; that limit does not cover other models. Confirm drivers and controls separately and request any required model-specific compliance documents.
Send the frame dimensions, bar model, selected white-light range, driver details and required brightness behavior through our contact page for a control-specification review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.