Looking for Showman's Show lightbox LED modules or LED bars for layered backlit event graphics? Compare internal sources for compatible indoor lightboxes using the complete approved print stack.
Which LED modules suit layered event-graphic lightboxes?
Compare edge-lit and rear-backlight bars with the actual mask, diffusion and graphic layers together. Check illuminated dimensions, usable frame depth, mounting spans, source length, optics and distance to the print. Selecting a source from the outer graphic alone leaves the other layers untested; the LED bars do not include the frame or printed materials.
How do I test the mask, diffusion and printed graphic together?
Assemble the approved stack in its intended order under the planned lighting. Inspect intended light-transfer areas for bright spots and shadows, then check masked regions for unwanted transmission and the complete image from the visitor viewing positions. Review the sample before fixing source positions; a white diffusion layer or black mask alone does not establish an even or opaque result.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What layer and frame details should I send?
Send the full approved stack, light-transfer pattern, lit face size, usable depth, mounting spans, service access, connectors and supply details. Confirm layout and wiring before ordering. Event industry use does not make an indoor LED suitable outdoors; confirm moisture, cleaning, enclosure and actual installation requirements separately.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your full mask, diffusion and graphic samples with frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Showman's Show lightbox LED modules or LED bars for layered backlit event graphics? Compare internal sources for compatible indoor lightboxes using the complete approved print stack.
Which LED modules suit layered event-graphic lightboxes?
Compare edge-lit and rear-backlight bars with the actual mask, diffusion and graphic layers together. Check illuminated dimensions, usable frame depth, mounting spans, source length, optics and distance to the print. Selecting a source from the outer graphic alone leaves the other layers untested; the LED bars do not include the frame or printed materials.
How do I test the mask, diffusion and printed graphic together?
Assemble the approved stack in its intended order under the planned lighting. Inspect intended light-transfer areas for bright spots and shadows, then check masked regions for unwanted transmission and the complete image from the visitor viewing positions. Review the sample before fixing source positions; a white diffusion layer or black mask alone does not establish an even or opaque result.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What layer and frame details should I send?
Send the full approved stack, light-transfer pattern, lit face size, usable depth, mounting spans, service access, connectors and supply details. Confirm layout and wiring before ordering. Event industry use does not make an indoor LED suitable outdoors; confirm moisture, cleaning, enclosure and actual installation requirements separately.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your full mask, diffusion and graphic samples with frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.