Searching for Seafood Expo North America lightbox LED modules or LED bars for backlit seafood brand panels? Compare internal sources for compatible indoor graphic lightboxes beside tasting and buyer meeting areas.
Which LED modules suit seafood-exhibition graphic lightboxes?
Compare edge-lit and rear-backlight bars with the approved graphic, illuminated dimensions, usable frame depth and mounting spans. Check source length, optics, distance to the print and supply compatibility. Keep the brand graphic and its source layout separate from refrigerated displays, chef work lights and lighting used to assess actual food products.
Can I update product graphics without changing the LED layout?
Confirm the current approved artwork and product information before printing. Keep brand-panel revisions consistent with the separate tasting menu and presentation. If the material, print coverage, face size or source distance changes, test the new graphic with the existing layout under planned hall lighting and viewing distances. Retaining the frame or LEDs does not establish the new print's appearance without a trial.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I check near tasting and meeting areas?
Plan access to connectors and power equipment without blocking preparation or buyer conversations. Send lit size, usable depth, mounting spans, graphic samples, viewing distances, service openings, supply voltage and connector photos. Verify wiring, frame compatibility and nearby service layout before ordering; moisture, cleaning, food-contact and installation suitability require separate checks.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your revised seafood-brand graphic and frame details to compare suitable internal sources before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for Seafood Expo North America lightbox LED modules or LED bars for backlit seafood brand panels? Compare internal sources for compatible indoor graphic lightboxes beside tasting and buyer meeting areas.
Which LED modules suit seafood-exhibition graphic lightboxes?
Compare edge-lit and rear-backlight bars with the approved graphic, illuminated dimensions, usable frame depth and mounting spans. Check source length, optics, distance to the print and supply compatibility. Keep the brand graphic and its source layout separate from refrigerated displays, chef work lights and lighting used to assess actual food products.
Can I update product graphics without changing the LED layout?
Confirm the current approved artwork and product information before printing. Keep brand-panel revisions consistent with the separate tasting menu and presentation. If the material, print coverage, face size or source distance changes, test the new graphic with the existing layout under planned hall lighting and viewing distances. Retaining the frame or LEDs does not establish the new print's appearance without a trial.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I check near tasting and meeting areas?
Plan access to connectors and power equipment without blocking preparation or buyer conversations. Send lit size, usable depth, mounting spans, graphic samples, viewing distances, service openings, supply voltage and connector photos. Verify wiring, frame compatibility and nearby service layout before ordering; moisture, cleaning, food-contact and installation suitability require separate checks.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your revised seafood-brand graphic and frame details to compare suitable internal sources before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.