Looking for Ozwater lightbox LED modules or internal LED bars for acrylic exhibition signs? Compare light sources for illuminated water-industry display graphics.
Which LEDs suit an acrylic message sign?
Compare edge-lit and rear-backlight options using the real acrylic face, usable depth and mounting space. A round sign does not mean a rigid bar can bend; measure the straight spans available inside.
How do acrylic transmission and masking affect the lightbox?
Test a face sample with its actual graphic and masking. Inspect bright patches, dark edges and message legibility from intended viewing positions before fixing source spacing. Face thickness and transmission matter; a supplier brightness figure alone cannot predict the finished sign.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What sign details should I send for LED selection?
Send the face sample, graphic or masking treatment, thickness, usable cavity, straight mounting spans, supports, planned source layout, connectors and supply. These are internal display light sources; existing-sign compatibility and the complete assembly must be checked.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your acrylic sign and mounting measurements to compare suitable lightbox sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Ozwater lightbox LED modules or internal LED bars for acrylic exhibition signs? Compare light sources for illuminated water-industry display graphics.
Which LEDs suit an acrylic message sign?
Compare edge-lit and rear-backlight options using the real acrylic face, usable depth and mounting space. A round sign does not mean a rigid bar can bend; measure the straight spans available inside.
How do acrylic transmission and masking affect the lightbox?
Test a face sample with its actual graphic and masking. Inspect bright patches, dark edges and message legibility from intended viewing positions before fixing source spacing. Face thickness and transmission matter; a supplier brightness figure alone cannot predict the finished sign.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What sign details should I send for LED selection?
Send the face sample, graphic or masking treatment, thickness, usable cavity, straight mounting spans, supports, planned source layout, connectors and supply. These are internal display light sources; existing-sign compatibility and the complete assembly must be checked.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your acrylic sign and mounting measurements to compare suitable lightbox sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.