Looking for LED modules for single or double-sided fabric lightboxes around OCTANORM Training Days? The partner describes hands-on comparisons across the system portfolio, which includes illuminated fabric frames. Compare independent internal LEDs here for your own lightbox prototype.
Can the same LED layout illuminate both sides of a lightbox?
Do not assume it can. Test each face with its intended graphic. Check LED placement, beam angle, internal supports and the available space before approving a double-sided construction.
What should I compare before ordering LEDs for a double-sided display?
Inspect both faces separately for bright spots, dark areas and unwanted image show-through. Record the frame depth, graphic material and light-source arrangement so the accepted prototype can be repeated.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules approved replacements for OCTANORM lighting?
No approval is claimed. Verify the selected product’s dimensions, mounting, connector and electrical requirements against your construction before ordering.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send dimensions, face count, graphic references, internal support positions and supply details through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for LED modules for single or double-sided fabric lightboxes around OCTANORM Training Days? The partner describes hands-on comparisons across the system portfolio, which includes illuminated fabric frames. Compare independent internal LEDs here for your own lightbox prototype.
Can the same LED layout illuminate both sides of a lightbox?
Do not assume it can. Test each face with its intended graphic. Check LED placement, beam angle, internal supports and the available space before approving a double-sided construction.
What should I compare before ordering LEDs for a double-sided display?
Inspect both faces separately for bright spots, dark areas and unwanted image show-through. Record the frame depth, graphic material and light-source arrangement so the accepted prototype can be repeated.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules approved replacements for OCTANORM lighting?
No approval is claimed. Verify the selected product’s dimensions, mounting, connector and electrical requirements against your construction before ordering.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send dimensions, face count, graphic references, internal support positions and supply details through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.