Preparing a printed lightbox backwall for an inline supplier exhibit at The NGA Show? Compare internal LED sources around your grocery-product or retail-technology demonstration. Browse all 26 Modules products below.
Will visitors see the message behind the demonstration counter?
Check the artwork from the aisle with counters, samples and monitors in place. Test small text, pale packaging images and dark brand areas in the illuminated frame. Reposition obstructions before choosing more LED power.
How can one inline wall support changing supplier graphics?
Use the actual fabric or printed panel when comparing edge lighting and direct rear backlighting. Record the approved white tone and graphic-to-LED spacing. Test access for graphic changes and power disconnection with the counter in its normal position.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these LEDs replace grocery-case lights or food-display equipment?
This selection serves compatible exhibition graphic lightboxes. It does not establish suitability for refrigerated cases, food-contact environments or retail-screen hardware. Check the chosen model and the separate requirements of your demonstration equipment.
Before ordering
Featured bars use separate DC24V constant-voltage supplies. The dual-CCT model needs a separate compatible 3-wire controller. Only the featured 10W slim model lists up to six compatible bars per run, subject to cable and load checks. Verify pinout and polarity for every selected model.
Send the inline layout, counter height, frame depth and printed samples for a test configuration and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Preparing a printed lightbox backwall for an inline supplier exhibit at The NGA Show? Compare internal LED sources around your grocery-product or retail-technology demonstration. Browse all 26 Modules products below.
Will visitors see the message behind the demonstration counter?
Check the artwork from the aisle with counters, samples and monitors in place. Test small text, pale packaging images and dark brand areas in the illuminated frame. Reposition obstructions before choosing more LED power.
How can one inline wall support changing supplier graphics?
Use the actual fabric or printed panel when comparing edge lighting and direct rear backlighting. Record the approved white tone and graphic-to-LED spacing. Test access for graphic changes and power disconnection with the counter in its normal position.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these LEDs replace grocery-case lights or food-display equipment?
This selection serves compatible exhibition graphic lightboxes. It does not establish suitability for refrigerated cases, food-contact environments or retail-screen hardware. Check the chosen model and the separate requirements of your demonstration equipment.
Before ordering
Featured bars use separate DC24V constant-voltage supplies. The dual-CCT model needs a separate compatible 3-wire controller. Only the featured 10W slim model lists up to six compatible bars per run, subject to cable and load checks. Verify pinout and polarity for every selected model.
Send the inline layout, counter height, frame depth and printed samples for a test configuration and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.