Looking for National Convenience Show lightbox LED modules or LED bars for a booth storage wall? Compare internal sources for illuminated printed graphics at the front of a stock room.
Which LED modules suit a stock room front lightbox?
Compare edge-lit and rear-backlight bars using the actual print, inner frame dimensions, usable depth and mounting spans. Source length, optics and distance from the graphic determine placement. These are internal components; frame and print are separate.
How do I keep the display visible while allowing stock access?
Review the actual stock room layout and required access clearance from the aisle. Check the illuminated face with the planned door position and nearby counters, without assuming the lightbox is mounted on a door. Keep maintenance access and cable routes clear when specifying the build.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox layout and power details should I send?
Send the print, illuminated face size, internal depth, mounting spans, stock room plan, access clearance, maintenance opening, viewing positions, connectors and supply. Verify source spacing, wiring and structure before ordering. Screen lighting and sampling counter lighting are separate tasks; existing frame compatibility must be checked.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print and stock room layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for National Convenience Show lightbox LED modules or LED bars for a booth storage wall? Compare internal sources for illuminated printed graphics at the front of a stock room.
Which LED modules suit a stock room front lightbox?
Compare edge-lit and rear-backlight bars using the actual print, inner frame dimensions, usable depth and mounting spans. Source length, optics and distance from the graphic determine placement. These are internal components; frame and print are separate.
How do I keep the display visible while allowing stock access?
Review the actual stock room layout and required access clearance from the aisle. Check the illuminated face with the planned door position and nearby counters, without assuming the lightbox is mounted on a door. Keep maintenance access and cable routes clear when specifying the build.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox layout and power details should I send?
Send the print, illuminated face size, internal depth, mounting spans, stock room plan, access clearance, maintenance opening, viewing positions, connectors and supply. Verify source spacing, wiring and structure before ordering. Screen lighting and sampling counter lighting are separate tasks; existing frame compatibility must be checked.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print and stock room layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.