Comparing reusable SEG lightboxes during a Modular Exhibits showroom visit in Canada? The supplier offers appointment visits and replaceable backlit fabric graphics. Explore independent LED modules here for your own build or verified modification.
Do I need new LEDs when replacing a lightbox fabric graphic?
Not automatically. Test the replacement print with the existing light source first. Compare the intended fabric, print process and finished illuminated appearance before deciding whether lighting changes are needed.
What should I record before changing LEDs in a reusable SEG frame?
Record the existing bar model, positions, connectors, supply and mounting space. Keep an accepted graphic sample for comparison. A different bar must be assessed with the assembled frame and new print.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules direct replacements for Modular Exhibits lightbox LEDs?
No direct fit is claimed. Verify mechanical, optical and electrical requirements before modifying a supplier’s complete display.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the frame drawing, existing lighting details and old and new graphic references through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Comparing reusable SEG lightboxes during a Modular Exhibits showroom visit in Canada? The supplier offers appointment visits and replaceable backlit fabric graphics. Explore independent LED modules here for your own build or verified modification.
Do I need new LEDs when replacing a lightbox fabric graphic?
Not automatically. Test the replacement print with the existing light source first. Compare the intended fabric, print process and finished illuminated appearance before deciding whether lighting changes are needed.
What should I record before changing LEDs in a reusable SEG frame?
Record the existing bar model, positions, connectors, supply and mounting space. Keep an accepted graphic sample for comparison. A different bar must be assessed with the assembled frame and new print.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules direct replacements for Modular Exhibits lightbox LEDs?
No direct fit is claimed. Verify mechanical, optical and electrical requirements before modifying a supplier’s complete display.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the frame drawing, existing lighting details and old and new graphic references through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.