LUXE PACK New York connects premium-packaging brands with manufacturers and material specialists. For independent builders placing product counters in front of a printed backlit display, this selection helps evaluate the lightbox as part of the sample presentation. Compare all 26 LED Modules products below.
Test the printed backdrop with the actual packaging on the counter
Build a representative section of the printed lightbox and place the intended packaging samples at their planned counter height and distance from it. Check whether the illuminated graphic makes a clear, glossy or metallic pack difficult to distinguish, hides a printed label or creates a distracting reflection on the sample. Keep room lighting, the sample orientation and the lightbox artwork fixed while comparing component layouts. Record the source setting together with the packaging finish and counter position; an attractive empty backdrop does not approve the complete product presentation.
Retain a packaging reference when changing the lightbox source
Keep the accepted packaging sample, printed backdrop and counter-position record for later component comparisons. After an LED model, CCT choice or layout changes, return the same pack to the recorded position and review both the backdrop and the product's visible detail. If the packaging finish or display position changes instead, reassess that arrangement before reusing the old lighting approval. Internal lightbox LEDs do not replace a separate task light needed for product examination, and their specifications alone do not establish a calibrated color-evaluation environment.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will choosing a higher-CRI lightbox module guarantee accurate packaging colors?
No. The printed backdrop, packaging finish, ambient light and viewing arrangement also affect what visitors see. Evaluate the actual presentation. These are components for independently designed graphic lightboxes, with no implied compatibility with a proprietary rental frame, video wall or packaging-inspection system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the lightbox section, backdrop artwork, packaging finish and counter-layout drawing to discuss an LED-module sample for the intended presentation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
LUXE PACK New York connects premium-packaging brands with manufacturers and material specialists. For independent builders placing product counters in front of a printed backlit display, this selection helps evaluate the lightbox as part of the sample presentation. Compare all 26 LED Modules products below.
Test the printed backdrop with the actual packaging on the counter
Build a representative section of the printed lightbox and place the intended packaging samples at their planned counter height and distance from it. Check whether the illuminated graphic makes a clear, glossy or metallic pack difficult to distinguish, hides a printed label or creates a distracting reflection on the sample. Keep room lighting, the sample orientation and the lightbox artwork fixed while comparing component layouts. Record the source setting together with the packaging finish and counter position; an attractive empty backdrop does not approve the complete product presentation.
Retain a packaging reference when changing the lightbox source
Keep the accepted packaging sample, printed backdrop and counter-position record for later component comparisons. After an LED model, CCT choice or layout changes, return the same pack to the recorded position and review both the backdrop and the product's visible detail. If the packaging finish or display position changes instead, reassess that arrangement before reusing the old lighting approval. Internal lightbox LEDs do not replace a separate task light needed for product examination, and their specifications alone do not establish a calibrated color-evaluation environment.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will choosing a higher-CRI lightbox module guarantee accurate packaging colors?
No. The printed backdrop, packaging finish, ambient light and viewing arrangement also affect what visitors see. Evaluate the actual presentation. These are components for independently designed graphic lightboxes, with no implied compatibility with a proprietary rental frame, video wall or packaging-inspection system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the lightbox section, backdrop artwork, packaging finish and counter-layout drawing to discuss an LED-module sample for the intended presentation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.