Looking for London Tech Week lightbox LED bars? A display supplier documents printed-fabric lightboxes for a tech exhibitor. Compare internal light sources for your own frame, with space for both optics and cabling.
Will the LED bar and its cable fit inside my lightbox frame?
Measure the clear internal section, not just the outside frame size. Allow space for the lens, fixing points, connectors and cable exit. Check that the printed face can close without pinching wires.
What details help me choose LED modules for a reusable exhibition lightbox?
Provide a frame section, illuminated dimensions, printed-face material and connector photos. Compare edge or rear lighting and access to wiring; test the proposed layout before a production order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I order from the frame dimensions alone?
Dimensions alone do not prove electrical or mechanical compatibility. Confirm the selected model’s supply, polarity, connectors, fixing method and light direction against the complete design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section and cable-exit photos through Contact us to compare suitable bars for your own lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for London Tech Week lightbox LED bars? A display supplier documents printed-fabric lightboxes for a tech exhibitor. Compare internal light sources for your own frame, with space for both optics and cabling.
Will the LED bar and its cable fit inside my lightbox frame?
Measure the clear internal section, not just the outside frame size. Allow space for the lens, fixing points, connectors and cable exit. Check that the printed face can close without pinching wires.
What details help me choose LED modules for a reusable exhibition lightbox?
Provide a frame section, illuminated dimensions, printed-face material and connector photos. Compare edge or rear lighting and access to wiring; test the proposed layout before a production order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I order from the frame dimensions alone?
Dimensions alone do not prove electrical or mechanical compatibility. Confirm the selected model’s supply, polarity, connectors, fixing method and light direction against the complete design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section and cable-exit photos through Contact us to compare suitable bars for your own lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.