Looking for JLC LIVE lightbox LED modules or LED bars for a construction supplier’s printed display? Compare internal sources for brand and assembly-diagram lightboxes beside manufacturer demonstration areas.
Will small assembly labels stay readable on an illuminated graphic?
Test the actual print with its arrows, section lines and small labels at both conversation and aisle distances. Uneven backlighting can distract from fine detail, while extra brightness cannot correct small type. Compare source length, lens direction and spacing with the usable frame depth and print transmission before approving a layout.
Where should the lightbox sit beside construction product samples?
Check the view with the planned samples and demonstration props in place. Leave the message visible when visitors gather, and keep graphic removal and cable access clear of the demonstration route. If the artwork changes between product demonstrations, keep the same sample-test procedure for each new print; the lighting layout is not automatically approved for every graphic.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these modules provide working light for the live demonstration?
They are internal sources for printed graphic lightboxes. Workshop task lighting, tool illumination and outdoor or dusty-site suitability need separate specifications. For the graphic circuit, verify each model’s voltage, connector pinout, polarity and linking limit; size an external driver for the connected wattage with suitable headroom.
Before ordering
Confirm dimensions, usable depth, mounting spans and print transmission. Plan reachable disconnection and check cable rating and voltage drop. A compatible external driver is required; fit in another supplier’s complete SEG frame is not assumed.
Compare all 26 LED Modules below. Send your diagram print, viewing distances, sample-display layout and frame section for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Looking for JLC LIVE lightbox LED modules or LED bars for a construction supplier’s printed display? Compare internal sources for brand and assembly-diagram lightboxes beside manufacturer demonstration areas.
Will small assembly labels stay readable on an illuminated graphic?
Test the actual print with its arrows, section lines and small labels at both conversation and aisle distances. Uneven backlighting can distract from fine detail, while extra brightness cannot correct small type. Compare source length, lens direction and spacing with the usable frame depth and print transmission before approving a layout.
Where should the lightbox sit beside construction product samples?
Check the view with the planned samples and demonstration props in place. Leave the message visible when visitors gather, and keep graphic removal and cable access clear of the demonstration route. If the artwork changes between product demonstrations, keep the same sample-test procedure for each new print; the lighting layout is not automatically approved for every graphic.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these modules provide working light for the live demonstration?
They are internal sources for printed graphic lightboxes. Workshop task lighting, tool illumination and outdoor or dusty-site suitability need separate specifications. For the graphic circuit, verify each model’s voltage, connector pinout, polarity and linking limit; size an external driver for the connected wattage with suitable headroom.
Before ordering
Confirm dimensions, usable depth, mounting spans and print transmission. Plan reachable disconnection and check cable rating and voltage drop. A compatible external driver is required; fit in another supplier’s complete SEG frame is not assumed.
Compare all 26 LED Modules below. Send your diagram print, viewing distances, sample-display layout and frame section for a selection enquiry.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.