Looking for IT Nation Connect lightbox LED modules or LED bars for reusable SEG exhibition lightboxes? Compare internal sources for replaceable printed service messages and partner graphics.
Can a reusable SEG lightbox keep the same LEDs after a graphic change?
Possibly, after checking the finished print. Keep the actual frame depth, mounting space and source arrangement in view. A new graphic alone does not prove that the LEDs need replacing or that the existing layout will suit the new print.
What should I test when service-message artwork changes?
Test the old and new printed faces with the proposed source layout. Compare light and dark coverage, brand colours and readable service text. Recheck edge seating and fabric tension after the swap, and approve the new illuminated image before repeating the build.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and existing-frame details should I send?
Send old and proposed graphics, face material, dimensions, depth and frame sections, existing source layout and mounting, plus access, connectors and supply details. Our modules are internal sources to assess for your build, not a guaranteed replacement for a named lightbox system.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your replacement graphic and existing-frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for IT Nation Connect lightbox LED modules or LED bars for reusable SEG exhibition lightboxes? Compare internal sources for replaceable printed service messages and partner graphics.
Can a reusable SEG lightbox keep the same LEDs after a graphic change?
Possibly, after checking the finished print. Keep the actual frame depth, mounting space and source arrangement in view. A new graphic alone does not prove that the LEDs need replacing or that the existing layout will suit the new print.
What should I test when service-message artwork changes?
Test the old and new printed faces with the proposed source layout. Compare light and dark coverage, brand colours and readable service text. Recheck edge seating and fabric tension after the swap, and approve the new illuminated image before repeating the build.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and existing-frame details should I send?
Send old and proposed graphics, face material, dimensions, depth and frame sections, existing source layout and mounting, plus access, connectors and supply details. Our modules are internal sources to assess for your build, not a guaranteed replacement for a named lightbox system.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your replacement graphic and existing-frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.