ISOframe offers self-build training, including for Lumen lightbox customers. This independent selection focuses on packing and inspecting your own reusable indoor-lightbox components.
Plan disconnect points before closing the transport case
For your own frame design, identify which cables stay attached and which connectors must be unplugged. With power disconnected, photograph the cable route and label matching ends. Protect bars and connector bodies from being trapped beneath frame parts; do not pull on wires when disconnecting.
Inspect the light source after transport, before reassembly
Check for bent mounting parts, pinched leads and damaged connector housings before applying power. Reassemble a sample using the approved cable layout and compare illumination with the reference image. Quarantine damaged components instead of forcing a connector or changing polarity to make it fit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules original replacement parts for ISOframe Lumen?
No original-part or Lumen compatibility claim is made. Lumen has an integrated lighting system; ask its supplier about authorised service parts. BOOTH LIGHTS module selection requires a separate review of your own frame, voltage, connector and mounting design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send your independent lightbox dimensions, packing layout, connector photos and assembly drawing to discuss a sample and spare-component plan.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
ISOframe offers self-build training, including for Lumen lightbox customers. This independent selection focuses on packing and inspecting your own reusable indoor-lightbox components.
Plan disconnect points before closing the transport case
For your own frame design, identify which cables stay attached and which connectors must be unplugged. With power disconnected, photograph the cable route and label matching ends. Protect bars and connector bodies from being trapped beneath frame parts; do not pull on wires when disconnecting.
Inspect the light source after transport, before reassembly
Check for bent mounting parts, pinched leads and damaged connector housings before applying power. Reassemble a sample using the approved cable layout and compare illumination with the reference image. Quarantine damaged components instead of forcing a connector or changing polarity to make it fit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules original replacement parts for ISOframe Lumen?
No original-part or Lumen compatibility claim is made. Lumen has an integrated lighting system; ask its supplier about authorised service parts. BOOTH LIGHTS module selection requires a separate review of your own frame, voltage, connector and mounting design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send your independent lightbox dimensions, packing layout, connector photos and assembly drawing to discuss a sample and spare-component plan.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.