Indo Sign & Advertising Expo covers signage technology and LED components in Indonesia. For indoor lightbox fabrication, prepare a wiring-label record that travels with the assembly. Browse all LED Modules below.
Map physical connectors to the approved wiring diagram
Record the exact LED model, connector view, pin assignments, polarity and controller connection. Have the installer verify supplier documentation; wire colour or a matching plug shape alone does not establish compatibility.
Label branches before closing the frame
Identify each source group and its supply or control connection on both the harness and drawing. Keep labels legible and accessible without blocking the light path. After qualified wiring checks, save the verified diagram with the assembly record; isolate power before opening or disconnecting.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can matching wire colours confirm a replacement connection?
No. Confirm pin assignments, polarity and control requirements for the exact components. A labelled drawing supports identification but does not replace electrical verification.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame drawing, source models, connector photographs, supplier pin diagrams, branch labels and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Indo Sign & Advertising Expo covers signage technology and LED components in Indonesia. For indoor lightbox fabrication, prepare a wiring-label record that travels with the assembly. Browse all LED Modules below.
Map physical connectors to the approved wiring diagram
Record the exact LED model, connector view, pin assignments, polarity and controller connection. Have the installer verify supplier documentation; wire colour or a matching plug shape alone does not establish compatibility.
Label branches before closing the frame
Identify each source group and its supply or control connection on both the harness and drawing. Keep labels legible and accessible without blocking the light path. After qualified wiring checks, save the verified diagram with the assembly record; isolate power before opening or disconnecting.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can matching wire colours confirm a replacement connection?
No. Confirm pin assignments, polarity and control requirements for the exact components. A labelled drawing supports identification but does not replace electrical verification.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame drawing, source models, connector photographs, supplier pin diagrams, branch labels and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.