Choosing IMCAS World Congress lightbox LED modules for an elevated fascia and a smaller showcase front? Assess each enclosure separately, including its depth, visitor viewing position and space for the selected LED bar.
Can a fascia and counter lightbox use the same LED bar?
Only if the actual enclosure sections support it and tests with both final fronts give the required result. A high brand header and a low counter front may differ in depth, source position, optics and viewing angle. Check the bar's physical dimensions, mounting clearance and access for servicing; matching the brand graphic does not establish identical lighting needs.
Does the booth floor area tell me how many LEDs to buy?
No. Make a separate schedule of the illuminated fronts and their internal layouts. Calculate sources from each lightbox's actual opening, clear depth, material and tested spacing. Keep monitor content, storage walls and ordinary fabric graphics separate. Verify each run's power and model-specific limits instead of extending one circuit through every lightbox on a compact stand.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What details help with lightboxes near a screen and storage?
Send labeled fascia and counter sections, front samples, mounting and cable routes, power labels, and photos showing screens and access doors. Check the visible fronts from visitor positions, without assuming a source change will remove screen reflections. Preserve access to storage and electrical connections, and confirm permission before modifying rented equipment. These bars illuminate exhibition graphics, not aesthetic-treatment devices or a complete stand.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the actual enclosure sections and front samples for source-fit comparison, quantity review and a component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Choosing IMCAS World Congress lightbox LED modules for an elevated fascia and a smaller showcase front? Assess each enclosure separately, including its depth, visitor viewing position and space for the selected LED bar.
Can a fascia and counter lightbox use the same LED bar?
Only if the actual enclosure sections support it and tests with both final fronts give the required result. A high brand header and a low counter front may differ in depth, source position, optics and viewing angle. Check the bar's physical dimensions, mounting clearance and access for servicing; matching the brand graphic does not establish identical lighting needs.
Does the booth floor area tell me how many LEDs to buy?
No. Make a separate schedule of the illuminated fronts and their internal layouts. Calculate sources from each lightbox's actual opening, clear depth, material and tested spacing. Keep monitor content, storage walls and ordinary fabric graphics separate. Verify each run's power and model-specific limits instead of extending one circuit through every lightbox on a compact stand.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What details help with lightboxes near a screen and storage?
Send labeled fascia and counter sections, front samples, mounting and cable routes, power labels, and photos showing screens and access doors. Check the visible fronts from visitor positions, without assuming a source change will remove screen reflections. Preserve access to storage and electrical connections, and confirm permission before modifying rented equipment. These bars illuminate exhibition graphics, not aesthetic-treatment devices or a complete stand.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the actual enclosure sections and front samples for source-fit comparison, quantity review and a component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.