Heavent Paris brings together event production, stand design, signage and large-format print professionals. For teams building independent indoor lightboxes for event graphics, compare all LED Modules below and prepare a brief for the intended display location.
Plan the illuminated graphic for its viewing position
State whether the lightbox will carry a directional message, entrance identity or brand image. Record the visible face size, viewing direction, frame depth and illuminated sides. Allow for the graphic content and surrounding indoor light when reviewing the complete sample; bar output alone does not establish message readability.
Keep lighting access in the installation brief
Show the LED mounting positions, cable exits and access to separate power and controls. Explain how the frame will be installed and how a graphic or component can be removed. Check the actual illuminated face and the access arrangement before ordering production quantities; do not infer installation approval from the purchase of a LED component.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can these modules be used as complete stage-lighting or LED-video equipment?
These are internal light sources for suitable lightbox builds, not complete stage fixtures, video tiles or an installed display. Confirm the intended application and exact model requirements. No affiliation with Heavent Paris or compatibility with a participating supplier's proprietary system is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the graphic purpose, viewing position, frame section, mounting and access details, candidate models and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Heavent Paris brings together event production, stand design, signage and large-format print professionals. For teams building independent indoor lightboxes for event graphics, compare all LED Modules below and prepare a brief for the intended display location.
Plan the illuminated graphic for its viewing position
State whether the lightbox will carry a directional message, entrance identity or brand image. Record the visible face size, viewing direction, frame depth and illuminated sides. Allow for the graphic content and surrounding indoor light when reviewing the complete sample; bar output alone does not establish message readability.
Keep lighting access in the installation brief
Show the LED mounting positions, cable exits and access to separate power and controls. Explain how the frame will be installed and how a graphic or component can be removed. Check the actual illuminated face and the access arrangement before ordering production quantities; do not infer installation approval from the purchase of a LED component.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can these modules be used as complete stage-lighting or LED-video equipment?
These are internal light sources for suitable lightbox builds, not complete stage fixtures, video tiles or an installed display. Confirm the intended application and exact model requirements. No affiliation with Heavent Paris or compatibility with a participating supplier's proprietary system is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the graphic purpose, viewing position, frame section, mounting and access details, candidate models and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.