Looking for HärtereiPraxis lightbox LED modules or LED bars for a SEG backdrop beside a reception table? Compare internal sources for printed conference brand walls.
Which LEDs suit a SEG backdrop beside a reception table?
Compare edge-lit and rear-backlight options with the actual graphic, usable frame depth and mounting space. A table in front of the display does not determine its internal LED layout.
Will the table obscure lower printed information?
Check the finished illuminated graphic with the planned table height and position, from approach routes and seated viewing positions. Move essential text if furniture hides it; adding LEDs cannot make obscured text visible. Keep access to the source connections in view when placing furniture.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What backdrop and table details should I send?
Send graphic and face material, frame sections and usable depth, source layout, table height and position, viewing positions, service access, connectors and power details. These LEDs light printed displays, not heat-treatment equipment; compatibility with an existing lightbox must be checked.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backdrop and furniture layout to compare suitable internal light sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for HärtereiPraxis lightbox LED modules or LED bars for a SEG backdrop beside a reception table? Compare internal sources for printed conference brand walls.
Which LEDs suit a SEG backdrop beside a reception table?
Compare edge-lit and rear-backlight options with the actual graphic, usable frame depth and mounting space. A table in front of the display does not determine its internal LED layout.
Will the table obscure lower printed information?
Check the finished illuminated graphic with the planned table height and position, from approach routes and seated viewing positions. Move essential text if furniture hides it; adding LEDs cannot make obscured text visible. Keep access to the source connections in view when placing furniture.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What backdrop and table details should I send?
Send graphic and face material, frame sections and usable depth, source layout, table height and position, viewing positions, service access, connectors and power details. These LEDs light printed displays, not heat-treatment equipment; compatibility with an existing lightbox must be checked.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backdrop and furniture layout to compare suitable internal light sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.