Searching for gradireland lightbox LED modules or LED bars for multi-face recruitment displays? Compare internal sources for compatible indoor graphic lightbox towers used in employer-brand exhibition spaces.
Which LED modules suit multi-face recruitment lightboxes?
Compare edge-lit and rear-backlight bars for each illuminated face using its dimensions, usable internal depth and mounting spans. Check source length, optics and distance to the graphic. A layout for one flat wall does not establish coverage around a tower; review each face and the corner arrangement separately.
How do I check every face and corner of a lightbox tower?
Test the actual approved graphic samples in the assembled layout under the planned hall lighting. Inspect each face from its visitor approach routes, including corners and changes in viewing angle. Look for bright lines, dark edges and light leaking between faces before fixing the source positions. Do not assume equal wattage gives equal perceived brightness on different materials or face sizes.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What tower and power details should I send?
Send each illuminated face size, usable depth, mounting spans, corner arrangement, graphic samples, service openings, connector photos and supply details. Agree access to each circuit before enclosing the tower. Confirm electrical compatibility and layout before ordering; frame stability, structural mounting and venue approval remain separate installation checks.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your multi-face lightbox drawings and graphic samples to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for gradireland lightbox LED modules or LED bars for multi-face recruitment displays? Compare internal sources for compatible indoor graphic lightbox towers used in employer-brand exhibition spaces.
Which LED modules suit multi-face recruitment lightboxes?
Compare edge-lit and rear-backlight bars for each illuminated face using its dimensions, usable internal depth and mounting spans. Check source length, optics and distance to the graphic. A layout for one flat wall does not establish coverage around a tower; review each face and the corner arrangement separately.
How do I check every face and corner of a lightbox tower?
Test the actual approved graphic samples in the assembled layout under the planned hall lighting. Inspect each face from its visitor approach routes, including corners and changes in viewing angle. Look for bright lines, dark edges and light leaking between faces before fixing the source positions. Do not assume equal wattage gives equal perceived brightness on different materials or face sizes.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What tower and power details should I send?
Send each illuminated face size, usable depth, mounting spans, corner arrangement, graphic samples, service openings, connector photos and supply details. Agree access to each circuit before enclosing the tower. Confirm electrical compatibility and layout before ordering; frame stability, structural mounting and venue approval remain separate installation checks.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your multi-face lightbox drawings and graphic samples to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.