drupa connects print and display-production suppliers. For printed SEG fabric lightboxes, approve the assembled illuminated graphic as well as the print. Browse the full LED Modules range below.
Inspect the finished fabric in the illuminated opening
Fit the final graphic with its intended tension, seams and silicone edge. Mark shadows from joints, folds, fasteners or internal braces. Record frame depth and reflective surfaces; a flat print inspection cannot reveal every shadow in an assembled lightbox.
Correct the cause before adding corner light
Check fabric seating and structural obstructions first. Trial a revised primary bar position, then consider supplemental corner light for a remaining dark area. Match color temperature and retest the whole face. A corner module supplements the main layout; it does not guarantee removal of seam shadows.
Compare LED lightbox sources
- 8W supplemental corner module: 202×24×16mm including lens, DC24V, 600–700lm and 10°×40° optics; confirm fit and color match.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
- MODULAP-compatible edge-lit family: 12W/18W, 470×23×16mm including lens, DC24V, 1320/1980lm and 9°×50° optics; verify the actual frame.
Can higher wattage correct a folded fabric edge?
Not reliably. Inspect the physical fold and frame obstruction before changing output. Keep the approved fabric, frame and lighting layout together for repeat production.
Before ordering
These are internal LED sources, not complete lightboxes. Verify DC24V, load, connector pinout and polarity; select external power separately. The featured 10W slim bar allows at most 6 per run after wiring checks. Do not transfer that limit to other models.
Send the tensioned-graphic photos, marked shadow locations, frame section, seam positions and quantity through our contact page for a component review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
drupa connects print and display-production suppliers. For printed SEG fabric lightboxes, approve the assembled illuminated graphic as well as the print. Browse the full LED Modules range below.
Inspect the finished fabric in the illuminated opening
Fit the final graphic with its intended tension, seams and silicone edge. Mark shadows from joints, folds, fasteners or internal braces. Record frame depth and reflective surfaces; a flat print inspection cannot reveal every shadow in an assembled lightbox.
Correct the cause before adding corner light
Check fabric seating and structural obstructions first. Trial a revised primary bar position, then consider supplemental corner light for a remaining dark area. Match color temperature and retest the whole face. A corner module supplements the main layout; it does not guarantee removal of seam shadows.
Compare LED lightbox sources
- 8W supplemental corner module: 202×24×16mm including lens, DC24V, 600–700lm and 10°×40° optics; confirm fit and color match.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
- MODULAP-compatible edge-lit family: 12W/18W, 470×23×16mm including lens, DC24V, 1320/1980lm and 9°×50° optics; verify the actual frame.
Can higher wattage correct a folded fabric edge?
Not reliably. Inspect the physical fold and frame obstruction before changing output. Keep the approved fabric, frame and lighting layout together for repeat production.
Before ordering
These are internal LED sources, not complete lightboxes. Verify DC24V, load, connector pinout and polarity; select external power separately. The featured 10W slim bar allows at most 6 per run after wiring checks. Do not transfer that limit to other models.
Send the tensioned-graphic photos, marked shadow locations, frame section, seam positions and quantity through our contact page for a component review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.