Comparing fabric lightboxes during a Calgary showroom visit? Display Dynamics invites showroom visits and separately lists fabric lightbox kits. Use what you learn about finished displays to prepare a comparison of internal LED components for your own specified frame.
What should I record before choosing LED bars for my own lightbox?
Record the illuminated face dimensions, usable depth, print material, source arrangement and connector details. Evaluate the actual print under representative ambient light. A finished display’s appearance alone does not identify the components needed inside a different frame.
Can I copy the brightness of a showroom display by buying the same wattage?
Equal wattage does not guarantee equal appearance. Optics, source spacing, depth and print transmission all matter. Compare your actual material and proposed layout, then use the selected product specifications to check the required electrical load.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these approved replacement modules for the showroom supplier’s kits?
No supplier-specific compatibility or approval is claimed. Confirm mounting, voltage, polarity and connectors for your own build. The visit invitation does not establish which particular lightbox is on display or how appointments are arranged; ask the showroom supplier directly.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section, print material, intended ambient conditions and source layout through Contact us to compare suitable internal light sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Comparing fabric lightboxes during a Calgary showroom visit? Display Dynamics invites showroom visits and separately lists fabric lightbox kits. Use what you learn about finished displays to prepare a comparison of internal LED components for your own specified frame.
What should I record before choosing LED bars for my own lightbox?
Record the illuminated face dimensions, usable depth, print material, source arrangement and connector details. Evaluate the actual print under representative ambient light. A finished display’s appearance alone does not identify the components needed inside a different frame.
Can I copy the brightness of a showroom display by buying the same wattage?
Equal wattage does not guarantee equal appearance. Optics, source spacing, depth and print transmission all matter. Compare your actual material and proposed layout, then use the selected product specifications to check the required electrical load.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these approved replacement modules for the showroom supplier’s kits?
No supplier-specific compatibility or approval is claimed. Confirm mounting, voltage, polarity and connectors for your own build. The visit invitation does not establish which particular lightbox is on display or how appointments are arranged; ask the showroom supplier directly.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section, print material, intended ambient conditions and source layout through Contact us to compare suitable internal light sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.