Black Hat USA has an exhibition Business Hall for cybersecurity suppliers. This selection helps independent booth-lightbox builders evaluate high-contrast printed graphics before choosing internal LED components.
Proof dark graphics with the light source switched on
Use the intended fabric or translucent graphic, backing surface, frame depth and LED layout in a representative sample. Include dark backgrounds, small light text and bright logo areas in the print proof. Examine source patterns, washed-out dark areas and light escaping at the frame edge from the intended viewing positions.
Approve the print and electrical configuration together
Compare candidate modules with the same graphic rather than assuming that more power gives a better dark-background result. Keep a record of the accepted print proof, module spacing, driver and any tested brightness control. Review bright and dark regions again when the print material, layout or driver changes, before repeating the order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do lightbox modules replace a cybersecurity exhibit’s video wall?
These are internal light sources for independently designed printed lightboxes. They are not LED video tiles or complete exhibit systems. The event name does not establish frame, driver or dimmer compatibility; confirm the selected component specifications and test the finished graphic.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the lightbox drawing, dark-background print proof, viewing distance and proposed driver to discuss a model-specific sample.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Black Hat USA has an exhibition Business Hall for cybersecurity suppliers. This selection helps independent booth-lightbox builders evaluate high-contrast printed graphics before choosing internal LED components.
Proof dark graphics with the light source switched on
Use the intended fabric or translucent graphic, backing surface, frame depth and LED layout in a representative sample. Include dark backgrounds, small light text and bright logo areas in the print proof. Examine source patterns, washed-out dark areas and light escaping at the frame edge from the intended viewing positions.
Approve the print and electrical configuration together
Compare candidate modules with the same graphic rather than assuming that more power gives a better dark-background result. Keep a record of the accepted print proof, module spacing, driver and any tested brightness control. Review bright and dark regions again when the print material, layout or driver changes, before repeating the order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do lightbox modules replace a cybersecurity exhibit’s video wall?
These are internal light sources for independently designed printed lightboxes. They are not LED video tiles or complete exhibit systems. The event name does not establish frame, driver or dimmer compatibility; confirm the selected component specifications and test the finished graphic.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the lightbox drawing, dark-background print proof, viewing distance and proposed driver to discuss a model-specific sample.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.