Looking for BIBA Conference lightbox LED modules? The organizer describes an illuminated company-name and stand-number lightbox in its shell package. For your own specified display, compare internal sources and the power supply they require.
Does the stand’s power socket replace an LED power supply?
No. A venue socket and an LED power supply perform different roles. Check the input required by the selected module and choose a compatible supply, then confirm its input connection and permitted venue use. Do not connect a low-voltage module directly to a mains outlet.
How do I size the power supply for my lightbox LED bars?
Use the selected product’s rated input and the planned quantity to calculate load. Check supply capacity, wiring, voltage drop, connector limits and design margin for that arrangement. A socket allowance does not determine how many modules can be linked.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I use these bars as replacements inside the supplied shell lightbox?
No approved replacement or fit is claimed. Confirm the original components and any permitted work with the responsible stand supplier. Do not assume the package includes a suitable driver for a separate display; verify that display’s complete electrical arrangement.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send module choices and quantities, lightbox dimensions, planned supply and wiring details through Contact us to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for BIBA Conference lightbox LED modules? The organizer describes an illuminated company-name and stand-number lightbox in its shell package. For your own specified display, compare internal sources and the power supply they require.
Does the stand’s power socket replace an LED power supply?
No. A venue socket and an LED power supply perform different roles. Check the input required by the selected module and choose a compatible supply, then confirm its input connection and permitted venue use. Do not connect a low-voltage module directly to a mains outlet.
How do I size the power supply for my lightbox LED bars?
Use the selected product’s rated input and the planned quantity to calculate load. Check supply capacity, wiring, voltage drop, connector limits and design margin for that arrangement. A socket allowance does not determine how many modules can be linked.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I use these bars as replacements inside the supplied shell lightbox?
No approved replacement or fit is claimed. Confirm the original components and any permitted work with the responsible stand supplier. Do not assume the package includes a suitable driver for a separate display; verify that display’s complete electrical arrangement.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send module choices and quantities, lightbox dimensions, planned supply and wiring details through Contact us to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.