Looking for BDIA Dental Showcase lightbox LED modules or LED bars for backlit exhibition counter graphics? Compare internal sources for printed reception and product-display counter fronts.
Which LEDs suit a backlit exhibition counter front?
Compare edge-lit and rear-backlight options with the actual printed face and usable lighting depth. Check mounting space and test the whole front, including areas beside internal dividers, before approving source positions.
Can storage or equipment space reduce the lighting cavity?
Yes. Counter storage, dividers and equipment fittings can leave less space for the graphic lightbox than the counter exterior suggests. Mark the lighting cavity separately on the section drawing and keep the intended light path and service opening accessible.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What counter sections should I send?
Send face dimensions and material, final graphic, lighting depth, dividers, mounting and service access, plus connector and supply details. Our modules illuminate display graphics; they are not dental treatment lamps or medical-equipment components.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backlit counter sections to compare internal sources for the available lighting cavity.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for BDIA Dental Showcase lightbox LED modules or LED bars for backlit exhibition counter graphics? Compare internal sources for printed reception and product-display counter fronts.
Which LEDs suit a backlit exhibition counter front?
Compare edge-lit and rear-backlight options with the actual printed face and usable lighting depth. Check mounting space and test the whole front, including areas beside internal dividers, before approving source positions.
Can storage or equipment space reduce the lighting cavity?
Yes. Counter storage, dividers and equipment fittings can leave less space for the graphic lightbox than the counter exterior suggests. Mark the lighting cavity separately on the section drawing and keep the intended light path and service opening accessible.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What counter sections should I send?
Send face dimensions and material, final graphic, lighting depth, dividers, mounting and service access, plus connector and supply details. Our modules illuminate display graphics; they are not dental treatment lamps or medical-equipment components.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backlit counter sections to compare internal sources for the available lighting cavity.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.