Looking for Armageddon Expo lightbox LED modules or LED bars for a multi-brand gaming stand? Compare internal sources for indoor printed lightboxes using each brand’s actual graphic sample.
Which LEDs suit separate brand lightbox graphics?
Compare edge lighting and rear backlighting with each face’s lit dimensions, clear depth and mounting spans. Test the chosen source with the final printed face. Gaming-device accents or screen LEDs do not establish a graphic-lightbox specification.
Can one print sample approve both brand areas?
No. Compare each final brand print under its intended source and CCT, then review the faces together. Different inks and front materials can look different when lit. Dual-CCT selection does not provide RGB colour control or guarantee a printed brand-colour match.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What brand-print and lighting details should I send?
Send each print, lit dimensions, clear depth, source layout, intended CCT, connectors and supply voltage. Label the brand areas on the drawing and keep their sample approvals separate; confirm total electrical load before ordering.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send labelled brand samples and a lighting drawing to choose compatible internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Armageddon Expo lightbox LED modules or LED bars for a multi-brand gaming stand? Compare internal sources for indoor printed lightboxes using each brand’s actual graphic sample.
Which LEDs suit separate brand lightbox graphics?
Compare edge lighting and rear backlighting with each face’s lit dimensions, clear depth and mounting spans. Test the chosen source with the final printed face. Gaming-device accents or screen LEDs do not establish a graphic-lightbox specification.
Can one print sample approve both brand areas?
No. Compare each final brand print under its intended source and CCT, then review the faces together. Different inks and front materials can look different when lit. Dual-CCT selection does not provide RGB colour control or guarantee a printed brand-colour match.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What brand-print and lighting details should I send?
Send each print, lit dimensions, clear depth, source layout, intended CCT, connectors and supply voltage. Label the brand areas on the drawing and keep their sample approvals separate; confirm total electrical load before ordering.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send labelled brand samples and a lighting drawing to choose compatible internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.