Arizona Sign Association Tabletop & TopGolf brings regional sign businesses and suppliers together. For your own indoor lightbox, compare LED candidates with a record of their external condition. Browse all LED Modules below; use the lens review for models that have optical lenses.
Record the optical surface without altering the component
Photograph the lens-equipped bar and identify visible marks, residue or damage. Record the model and location of each observation. Do not dismantle the LED component or infer the condition of every bar from a single photograph.
Keep cleaning questions separate from lighting conclusions
Ask the supplier to confirm the cleaning method for the exact model before using solvents, abrasives or coatings. Record any agreed handling and repeat the complete lightbox sample review afterwards. Surface observations alone do not establish why an illuminated face looks uneven.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a visible mark on an LED lens explain every dark area on a lightbox?
No. Document the mark and the assembled-lightbox observation separately. The face, layout and surrounding parts also require review. Ask for model-specific assessment rather than assuming a cleaning method, a fault diagnosis or an automatic replacement.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the LED model, lens photographs, observed locations, handling history, complete lightbox sample observations and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Arizona Sign Association Tabletop & TopGolf brings regional sign businesses and suppliers together. For your own indoor lightbox, compare LED candidates with a record of their external condition. Browse all LED Modules below; use the lens review for models that have optical lenses.
Record the optical surface without altering the component
Photograph the lens-equipped bar and identify visible marks, residue or damage. Record the model and location of each observation. Do not dismantle the LED component or infer the condition of every bar from a single photograph.
Keep cleaning questions separate from lighting conclusions
Ask the supplier to confirm the cleaning method for the exact model before using solvents, abrasives or coatings. Record any agreed handling and repeat the complete lightbox sample review afterwards. Surface observations alone do not establish why an illuminated face looks uneven.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a visible mark on an LED lens explain every dark area on a lightbox?
No. Document the mark and the assembled-lightbox observation separately. The face, layout and surrounding parts also require review. Ask for model-specific assessment rather than assuming a cleaning method, a fault diagnosis or an automatic replacement.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the LED model, lens photographs, observed locations, handling history, complete lightbox sample observations and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.