ARC UK Dartford Open Day presents print and signage production capabilities. For your own portable indoor lightbox, compare LED Modules alongside a documented packing plan. Browse all models below; this selection does not establish compatibility with ARC display systems.
Document what travels installed and what travels separately
List bars, leads, connectors and loose mounting parts. Identify lenses or connections that could contact other components in the package. Ask the frame and packing suppliers to confirm support and separation; do not assume the graphic protects the LEDs.
Review the pack with the actual component arrangement
Record the selected LED model, packed arrangement and unpacking sequence. Keep loose hardware separated from optical surfaces and avoid using leads as carrying points. Have the complete packing arrangement assessed for the intended handling; a neat layout is not a transport test or damage guarantee.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does fitting an LED bar inside a portable frame verify protection during transport?
No. Installed fit and packing protection are separate checks. Confirm how the actual frame supports components during handling, then inspect the unpacked assembly before qualified personnel carry out electrical checks.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the LED model, frame drawing, installed and separate parts, packing sketch, intended handling and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
ARC UK Dartford Open Day presents print and signage production capabilities. For your own portable indoor lightbox, compare LED Modules alongside a documented packing plan. Browse all models below; this selection does not establish compatibility with ARC display systems.
Document what travels installed and what travels separately
List bars, leads, connectors and loose mounting parts. Identify lenses or connections that could contact other components in the package. Ask the frame and packing suppliers to confirm support and separation; do not assume the graphic protects the LEDs.
Review the pack with the actual component arrangement
Record the selected LED model, packed arrangement and unpacking sequence. Keep loose hardware separated from optical surfaces and avoid using leads as carrying points. Have the complete packing arrangement assessed for the intended handling; a neat layout is not a transport test or damage guarantee.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does fitting an LED bar inside a portable frame verify protection during transport?
No. Installed fit and packing protection are separate checks. Confirm how the actual frame supports components during handling, then inspect the unpacked assembly before qualified personnel carry out electrical checks.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the LED model, frame drawing, installed and separate parts, packing sketch, intended handling and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.