Planning a printed lightbox sample around NIZE’s Test before you invest demos? Compare internal LED modules with your own artwork and material. NIZE also describes Day & Night methods in its academy programme; confirm the scope of your demo directly with NIZE.
Compare the print with the light on and off
Keep the artwork, ink layers, substrate, frame depth and LED positions fixed while comparing light sources. View the finished face with backlighting on and off under the intended ambient light. Record the model, CCT and layout with the approved sample; a printer demo alone does not approve the complete lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can LED bars alone create a Day & Night graphic?
No. The printed layers and material control how the graphic appears in each condition. LED modules provide the internal light source. Agree the printing method with your print provider and test the assembled face; changing wattage alone cannot produce two different images.
Should I choose a 200mm or 470mm LED bar for my trial?
Measure the usable internal mounting run, including connector and cable clearance. Compare the 200mm 7W compact bar with the 470mm 12W/18W MODULAP or 20W rigid formats. Test the selected optics at the actual frame depth; length alone does not establish uniformity.
What information helps size the DC24V driver?
Specify the exact bar model, quantity, total rated watts, wiring layout and required driver headroom. These featured bars need a separate compatible constant-voltage supply. Send the approved sample layout and destination for a model-specific quotation; printer or RIP compatibility is not implied.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Planning a printed lightbox sample around NIZE’s Test before you invest demos? Compare internal LED modules with your own artwork and material. NIZE also describes Day & Night methods in its academy programme; confirm the scope of your demo directly with NIZE.
Compare the print with the light on and off
Keep the artwork, ink layers, substrate, frame depth and LED positions fixed while comparing light sources. View the finished face with backlighting on and off under the intended ambient light. Record the model, CCT and layout with the approved sample; a printer demo alone does not approve the complete lightbox.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can LED bars alone create a Day & Night graphic?
No. The printed layers and material control how the graphic appears in each condition. LED modules provide the internal light source. Agree the printing method with your print provider and test the assembled face; changing wattage alone cannot produce two different images.
Should I choose a 200mm or 470mm LED bar for my trial?
Measure the usable internal mounting run, including connector and cable clearance. Compare the 200mm 7W compact bar with the 470mm 12W/18W MODULAP or 20W rigid formats. Test the selected optics at the actual frame depth; length alone does not establish uniformity.
What information helps size the DC24V driver?
Specify the exact bar model, quantity, total rated watts, wiring layout and required driver headroom. These featured bars need a separate compatible constant-voltage supply. Send the approved sample layout and destination for a model-specific quotation; printer or RIP compatibility is not implied.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.