50W Tri-CCT Linkable LED Trade Show Light – 5500lm

50W Tri-CCT linkable LED trade show light for exhibition booths, large graphic walls and reusable display systems. A built-in switch selects 3000K, 4500K or 6500K at the fixture, so the same light can support warm, neutral or cool booth presentations.

• Output: 50W, 5,500 lm, CRI 90+
• Switchable CCT: 3000K / 4500K / 6500K
• Beam: 60 degrees
• Adjustment: 359-degree rotation and 0-90-degree tilt
• Linkable: published configuration supports up to 10 fixtures per run, subject to electrical limits
• Variants: gray or black; US, EU, UK or AU plug

Large exhibition booth lighting application: a 50W LED trade show light helps illuminate tall graphics, product areas and branded display walls with broad, high-output coverage.

For tall exhibition graphics and back walls, an adjustable LED display arm light directs light toward the printed surface while the Tri-CCT switch helps match the booth's presentation.

Linkable LED booth lights can be positioned across a larger trade show display to create consistent exhibition lighting for graphic walls and product zones.

High-Output Booth Lighting with Three CCT Settings

Use 3000K for warmer displays, 4500K for balanced general illumination, or 6500K for cooler, higher-contrast presentations. The selected setting is fixed by the switch until changed; this is a three-position CCT fixture, not continuously tunable white.

The 50W output is intended for larger graphics and demanding exhibition environments. Actual coverage depends on mounting height, arm position, beam overlap, ambient hall lighting, graphic reflectance and the brightness target. Test the intended layout before finalizing fixture quantity.

Specifications

Certification and electrical acceptance vary by venue and market. Request the applicable documents and confirm that the exact model, plug, production configuration and destination meet the project requirements.

What's Included

• 1 x 50W Tri-CCT LED display arm light in the selected color and plug type
• 1 x 3m power cord
• 1 x 1m link cable
• 1 x Aluminum clamp and 2 x aluminum sliding tabs

Linking Multiple Trade Show Lights

The published product configuration supports linking up to 10 fixtures, representing a 500W nominal lighting load. The safe quantity may be lower depending on plug and cable ratings, branch-circuit capacity, local voltage, extension layout, connector condition and venue rules. Do not exceed the lowest-rated component in the complete run.

• Use the plug type intended for the destination.
• Inspect all cords, connectors and link cables before installation.
• Confirm circuit capacity with the venue or qualified electrical provider.
• Distribute loads when required by the show contractor or local rules.

Tri-CCT or Fixed-CCT 50W Light?

Compare the fixed-CCT silver 50W trade show light and black 50W trade show light. For planning color temperature, read the trade show lighting CCT guide.

Planning Your Booth

Fixture quantity cannot be determined from booth dimensions alone. Consider graphic width and height, mounting distance, arm reach, desired beam overlap, ambient illumination and whether products or vertical graphics are the priority.

Send us the booth layout, graphic dimensions and show location for a fixture and connection recommendation. For project quantities, see wholesale and volume pricing.