50W Black Linkable LED Trade Show Light – 5500lm, Fixed CCT

Black 50W linkable LED trade show light for large exhibition graphics, island booths and high-output display lighting. Choose one fixed color-temperature range and the plug required for the destination.

• Output: 50W, 5,500 lm, CRI 90+
• Fixed CCT options: 2700-3200K, 4500-4700K or 6500-7000K
• Beam: 60 degrees
• Adjustment: 359-degree rotation and 0-90-degree tilt
• Linkable: published configuration supports up to 6 fixtures per run, subject to electrical limits
• Variants: black body; US, EU, UK or AU plug

High-Output Fixed-CCT Exhibition Light

This page is for the black fixed-CCT 50W model. Select the required color temperature at checkout; the fixture does not switch between CCT settings after purchase. Choose fixed CCT when the booth already uses one established lighting color and on-site switching is unnecessary.

At 5,500 lm per fixture, this model provides more output from each mounting position than lower-wattage booth lights. Actual coverage depends on mounting height, arm position, beam overlap, ambient hall lighting, graphic reflectance and target brightness. Test the proposed layout before finalizing quantity.

Specifications

Certification and electrical acceptance vary by venue and destination. Request the applicable documents and confirm that the exact model, plug and production configuration meet the project requirements.

What's Included

• One black 50W fixed-CCT LED display arm light in the selected CCT and plug type
• 3m power cord
• 1m link cable
• Aluminum clamp

Confirm clamp opening, mounting surface and plug type against the booth system before ordering.

Linking Up to Six Lights

The published configuration supports up to 6 fixtures per run, representing a 300W nominal lighting load. The safe quantity may be lower depending on cable and plug ratings, branch-circuit capacity, local voltage, extension layout, connector condition and venue rules. Do not exceed the lowest-rated component in the complete system.

• Use the plug version intended for the destination.
• Inspect power and link cables before each installation.
• Confirm available circuit capacity with the venue or electrical provider.
• Distribute loads when required by the show contractor or local rules.

Fixed CCT or Tri-CCT?

Compare the 50W Tri-CCT trade show light or the silver fixed-CCT 50W light. For wattage planning, read the 25W vs 50W booth-light guide.

Where a 50W High-Output Booth Light Helps

• Large graphic walls and island booths: put more published light output at each mounting point when displays are tall, wide or viewed from several aisles.
• Automotive, machinery and industrial exhibits: direct strong light toward equipment, materials, engineering details and demonstration zones.
• Furniture, interiors and building products: reveal surface texture, finishes and larger product forms.
• Technology, medical and premium product launches: focus attention on key equipment, hero products and branded panels.
• Exhibit builders and rental companies: use a black, linkable high-output fixture for compatible dark-frame and large-format stand designs.

Questions Before Ordering

Should I choose 25W or 50W?
Choose 50W when higher published output per mounting point is useful for large graphics, greater mounting distance or prominent product zones. Choose 25W when lower power and broader general coverage better suit the booth. Final quantity still depends on the layout and ambient light.

Is the color temperature switchable?
No. This is a fixed-CCT product. Select the required warm, natural or cool white variant when ordering.

Can six lights always share one connection?
No universal connection quantity is guaranteed. Six is the published maximum configuration, but the safe number may be lower according to the cable, plug, connector, circuit, voltage and venue rules.

Will the clamp fit my frame?
Fit depends on clamp opening, frame profile, mounting surface and clearance. Measure before ordering or send photos and dimensions through our contact page.

Planning the Installation

Fixture quantity cannot be selected from booth dimensions alone. Consider graphic width and height, mounting distance, arm reach, beam overlap, ambient light and whether the priority is vertical graphics, products or counters.

Send us the booth layout, graphic dimensions and show location for a fixture and connection recommendation. For project quantities, see wholesale and volume pricing.