VM & Display Show covers visual merchandising, graphics, lighting and retail display. When a printed indoor lightbox sits behind merchandise, review what the shopper can actually see before choosing its internal LEDs. Compare the full LED Modules range below for your frame and graphic.
Mark the visible message around merchandise
Draw the lightbox graphic, shelf edges and intended merchandise together. Identify the viewing positions and which text or image areas remain visible. Record the merchandise height and placement used for the trial; a clear illuminated face alone does not establish that the displayed message can be read.
Review the lit mockup with the display dressed
After qualified assembly and wiring checks, examine the actual print with the planned merchandise in place from the chosen viewing positions. Record blocked areas separately from lighting shadows and retain photos and the layout. Repeat the review after changing shelf positions or merchandise. More LED output cannot make a message visible through an opaque object.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can a brighter lightbox compensate for merchandise covering the graphic?
No. The viewing obstruction and the lightbox illumination are separate issues. Review the merchandise layout and test the complete display before accepting the source arrangement.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the frame, graphic layout, merchandise positions, viewing points, trial observations, source models and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
VM & Display Show covers visual merchandising, graphics, lighting and retail display. When a printed indoor lightbox sits behind merchandise, review what the shopper can actually see before choosing its internal LEDs. Compare the full LED Modules range below for your frame and graphic.
Mark the visible message around merchandise
Draw the lightbox graphic, shelf edges and intended merchandise together. Identify the viewing positions and which text or image areas remain visible. Record the merchandise height and placement used for the trial; a clear illuminated face alone does not establish that the displayed message can be read.
Review the lit mockup with the display dressed
After qualified assembly and wiring checks, examine the actual print with the planned merchandise in place from the chosen viewing positions. Record blocked areas separately from lighting shadows and retain photos and the layout. Repeat the review after changing shelf positions or merchandise. More LED output cannot make a message visible through an opaque object.
Compare LED lightbox sources
- 7W mini edge-lit bar: 200×23×16mm, DC24V, 770lm and standard 20°×60° optics; verify available mounting and removal space.
- 10W DC-plug edge-lit bar: 360×26×16mm including lens, DC24V, 1000lm ±10%, 15°×45° optics and dual-end DC sockets.
- Aluminum-profile edge-lit family: 22W/25W/32W, DC24V, 40.7×17mm housing and 14°×47° optics; specify length and wire exit.
Can a brighter lightbox compensate for merchandise covering the graphic?
No. The viewing obstruction and the lightbox illumination are separate issues. Review the merchandise layout and test the complete display before accepting the source arrangement.
Before ordering
These are internal light sources, not complete retail fixtures. Disconnect power before service. Verify DC24V, load, connector pinout and polarity; confirm power and hardware separately. The featured 10W DC-plug bar permits at most 6 per run after wiring checks. Do not transfer the limit to other models.
Send the frame, graphic layout, merchandise positions, viewing points, trial observations, source models and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.