Choosing Viszeralmedizin lightbox LED modules for a color-transition brand wall? Establish whether the colors come from the graphic, controlled lighting or both before ordering white LED bars.
Do colored backlit graphics need colored LED modules?
A light-transmitting print can create color under white light. A design that changes the emitted light color needs a suitable controlled-light system. Confirm how your own wall works; a photograph of a color transition cannot establish the source type. Our featured white bars are not RGB sources, and the dual-CCT bar changes white-light color temperature rather than producing colored light.
Which white-light CCT suits my backlit brand graphic?
Compare the final front material and print under the proposed white-light settings. Assess brand colors and white areas together, using the actual enclosure depth, optics and spacing. The featured dual-CCT bar needs its own compatible controller; CCT switching is not a feature of every product. Keep external lights for demonstration equipment separate from the internal graphic-lightbox layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What do you need to recommend LED bars for my wall?
Send the illuminated dimensions, clear internal depth, front material or sample, target white-light appearance, mounting details and supply labels. Confirm whether you need fixed white, selectable white or a separate color-changing system. Verify voltage, load, connector pinout and polarity before assembly. These components illuminate exhibit graphics; they are not surgical-device lighting or a complete wall.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your wall section and actual graphic sample to compare internal sources and request a component recommendation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Choosing Viszeralmedizin lightbox LED modules for a color-transition brand wall? Establish whether the colors come from the graphic, controlled lighting or both before ordering white LED bars.
Do colored backlit graphics need colored LED modules?
A light-transmitting print can create color under white light. A design that changes the emitted light color needs a suitable controlled-light system. Confirm how your own wall works; a photograph of a color transition cannot establish the source type. Our featured white bars are not RGB sources, and the dual-CCT bar changes white-light color temperature rather than producing colored light.
Which white-light CCT suits my backlit brand graphic?
Compare the final front material and print under the proposed white-light settings. Assess brand colors and white areas together, using the actual enclosure depth, optics and spacing. The featured dual-CCT bar needs its own compatible controller; CCT switching is not a feature of every product. Keep external lights for demonstration equipment separate from the internal graphic-lightbox layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What do you need to recommend LED bars for my wall?
Send the illuminated dimensions, clear internal depth, front material or sample, target white-light appearance, mounting details and supply labels. Confirm whether you need fixed white, selectable white or a separate color-changing system. Verify voltage, load, connector pinout and polarity before assembly. These components illuminate exhibit graphics; they are not surgical-device lighting or a complete wall.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your wall section and actual graphic sample to compare internal sources and request a component recommendation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.