Producing chocolate-brand lightboxes for Sweets & Snacks Expo? Compare internal LED sources for printed product imagery and deep-colour branding. Assess the illuminated graphic beside the physical product display before selecting the light source.
Which LEDs suit dark chocolate-brand lightbox graphics?
Test the final printed sample, including dark colour areas, pale lettering and packaging images, in the intended enclosure. Compare light distribution and the chosen white-light tone together. More watts cannot correct unsuitable print transmission, and a matching colour temperature does not guarantee a match to the brand colour.
How do I compare the graphic with the product display?
Place the illuminated sample beside the actual packaging under the planned stand lighting. Check whether the printed image looks balanced against the physical packs and whether shelves or display units hide the message. Record graphic-panel dimensions separately from the shelf display; total stand area does not set LED quantity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a backlit panel also light products on the shelf?
These modules illuminate the transmitting graphic inside a compatible lightbox. Lighting physical products requires a separately specified source and mounting arrangement. Dual-CCT bars offer the two white channels in the selected variant; intermediate blending requires a compatible controller and is not automatic.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all 26 products below. For a component quote, send the final print sample, enclosure section, mounting space, intended white-light tone and power details. Identify nearby product displays and confirm permission before changing rented lightboxes.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Producing chocolate-brand lightboxes for Sweets & Snacks Expo? Compare internal LED sources for printed product imagery and deep-colour branding. Assess the illuminated graphic beside the physical product display before selecting the light source.
Which LEDs suit dark chocolate-brand lightbox graphics?
Test the final printed sample, including dark colour areas, pale lettering and packaging images, in the intended enclosure. Compare light distribution and the chosen white-light tone together. More watts cannot correct unsuitable print transmission, and a matching colour temperature does not guarantee a match to the brand colour.
How do I compare the graphic with the product display?
Place the illuminated sample beside the actual packaging under the planned stand lighting. Check whether the printed image looks balanced against the physical packs and whether shelves or display units hide the message. Record graphic-panel dimensions separately from the shelf display; total stand area does not set LED quantity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a backlit panel also light products on the shelf?
These modules illuminate the transmitting graphic inside a compatible lightbox. Lighting physical products requires a separately specified source and mounting arrangement. Dual-CCT bars offer the two white channels in the selected variant; intermediate blending requires a compatible controller and is not automatic.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all 26 products below. For a component quote, send the final print sample, enclosure section, mounting space, intended white-light tone and power details. Identify nearby product displays and confirm permission before changing rented lightboxes.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.