SloanLED offers customer-location training for signmaking teams. This independent selection helps indoor-lightbox builders prepare electrical requirements for BOOTH LIGHTS components.
Write an electrical requirements sheet before choosing a module
Record the exact module model, rated DC voltage, quantity, connector pinout and polarity. Use its actual wattage to plan the driver load and cable arrangement. A connector that fits does not prove electrical compatibility; check the complete circuit before energising a sample.
Separate white-light selection from control requirements
Decide whether the project needs fixed white light or the selected dual-CCT model. Describe the intended switching or dimming method when asking for a quote. Do not infer DALI, DMX, addressable RGB or controller compatibility from an LED module name.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a BOOTH LIGHTS module purchase include SloanLED partner status?
No. This collection supplies independent component choices. Supplier training access, partner status and warranty conditions must be confirmed with SloanLED. These products are not presented as authorised SloanLED replacements.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the indoor-lightbox drawing, exact module quantity, cable route and control requirements for a model-specific sample discussion.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
SloanLED offers customer-location training for signmaking teams. This independent selection helps indoor-lightbox builders prepare electrical requirements for BOOTH LIGHTS components.
Write an electrical requirements sheet before choosing a module
Record the exact module model, rated DC voltage, quantity, connector pinout and polarity. Use its actual wattage to plan the driver load and cable arrangement. A connector that fits does not prove electrical compatibility; check the complete circuit before energising a sample.
Separate white-light selection from control requirements
Decide whether the project needs fixed white light or the selected dual-CCT model. Describe the intended switching or dimming method when asking for a quote. Do not infer DALI, DMX, addressable RGB or controller compatibility from an LED module name.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a BOOTH LIGHTS module purchase include SloanLED partner status?
No. This collection supplies independent component choices. Supplier training access, partner status and warranty conditions must be confirmed with SloanLED. These products are not presented as authorised SloanLED replacements.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the indoor-lightbox drawing, exact module quantity, cable route and control requirements for a model-specific sample discussion.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.