Looking for Salone del Mobile fabric lightbox LEDs or LED bars for illuminated lounge graphics? Compare internal sources for printed panels displayed like artwork around furniture.
Which LEDs suit lounge fabric lightbox panels?
Compare edge-lit and rear-backlight layouts using the actual fabric, finished print and usable frame depth. Check mounting clearance where lightbox panels sit around shelving or furniture.
How can adjacent panels show consistent print colours?
Compare neighbouring panels with the same printed colour sample under the intended lounge lighting. Check source colour temperature, brightness and light distribution together; a product specification alone cannot predict the finished print.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What bookcase and frame details should I send?
Send panel dimensions, fabric and print samples, frame sections, shelving clearances, mounting details and supply specifications. Confirm access for wiring and maintenance with your builder.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your lounge panel layout and frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Salone del Mobile fabric lightbox LEDs or LED bars for illuminated lounge graphics? Compare internal sources for printed panels displayed like artwork around furniture.
Which LEDs suit lounge fabric lightbox panels?
Compare edge-lit and rear-backlight layouts using the actual fabric, finished print and usable frame depth. Check mounting clearance where lightbox panels sit around shelving or furniture.
How can adjacent panels show consistent print colours?
Compare neighbouring panels with the same printed colour sample under the intended lounge lighting. Check source colour temperature, brightness and light distribution together; a product specification alone cannot predict the finished print.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What bookcase and frame details should I send?
Send panel dimensions, fabric and print samples, frame sections, shelving clearances, mounting details and supply specifications. Confirm access for wiring and maintenance with your builder.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your lounge panel layout and frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.